1) TC4 titanium alloy
TC4钛合金
1.
Hot spinning technology of wheel rim of TC4 titanium alloy;
TC4钛合金轮圈热旋成形技术研究
2.
Effects of local heat treatment by electron beam on microstructure and properties of TC4 titanium alloy welded joint;
电子束局部热处理对TC4钛合金焊接接头组织和性能的影响
3.
Microstructures and high-temperature properties of TC4 titanium alloy joints welded by electron beam;
TC4钛合金电子束焊接接头高温性能与组织
2) TC4 alloy
TC4钛合金
1.
Microstructures and properties of TC4 alloy joints welded by the e lectron beam welding;
TC4钛合金电子束焊接接头组织和性能
2.
Study on the precise welding technology of TC4 alloy;
TC4钛合金精密焊接工艺研究
3.
Effects of laser power density on residual stress and micro-hardness of the TC4 alloy welding line by laser shock processing(LSP) were analyzed.
利用高功率重复率Nd:YAG激光对TC4钛合金电子束焊缝进行了冲击强化处理,研究了激光冲击强化处理过程中改变激光功率密度对电子束焊缝残余应力分布和表面层硬度的影响。
3) titanium alloy
TC4钛合金
1.
A study has been performed on micromechanisms of cyclic deformation and fatigue damage in pure Zinc and TC4 Titanium alloy under low-cycle impact fatigue (LCIF) loading.
研究了六方金属纯锌和TC4钛合金在低周冲击疲劳载荷下的循环变形和损伤机制。
4) TC4 Ti alloy
TC4钛合金
1.
Welded joint property of TC4 Ti alloy by electron beam welding;
TC4钛合金电子束焊接头性能研究
2.
Stretching fixation was proposed to improve milling surface quality of TC4 Ti alloy.
在TC4钛合金铣削过程中采用拉伸装夹技术强化表面质量。
3.
The thick plate of TC4 Ti alloy is welded by TIG,the structure of welding joint of Ti-6Al-4V is studied and analysed,at the same time,the property of welding joint is measured,as a result, appropriate welding craft and welding method are found.
采用 TIG 焊方法对 TC4钛合金厚板进行焊接,分析、研究了 Ti-6Al-4V 合金焊接接头的组织,测定了 Ti-6Al-4V 合金焊接接头的性能,摸索出了合适的焊接方法与工艺。
5) TC4 titanium alloy
TC4 钛合金
6) TC4 titanium alloy sheet
TC4钛合金板
参考词条
补充资料：Pigment Printing Paste Flavine TC3G 7940
分子式：
CAS号：
性质：淡黄色浆状。具有涂料色浆的通性。由永固黄GGTN、表面活性剂和吸湿剂经调和、磨细后以水稀释而成。适用于涂料印花。还可用于水性建筑涂料、皮革、纸张、肥皂和洗涤剂等多种材料的着色。
CAS号：
性质：淡黄色浆状。具有涂料色浆的通性。由永固黄GGTN、表面活性剂和吸湿剂经调和、磨细后以水稀释而成。适用于涂料印花。还可用于水性建筑涂料、皮革、纸张、肥皂和洗涤剂等多种材料的着色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。