TMCP,TMCP,在线英语词典,英文翻译,专业英语

1) TMCP

TMCP

To Improve the Properties of Quasi-bainitic Wear Resistant Plate by Means of TMCP Process;

通过TMCP工艺改善准贝氏体耐磨钢板性能

Effect of TMCP on Microstructure and Mechanical Properties of Low Carbon-Manganese Steel;

TMCP对低碳锰钢组织和力学性能的影响

TMCP of Upgraded Q235 Plate;

升级Q235中厚板的TMCP工艺研究

2) TMCP

控轧控冷

This paper introduces the process route for producting D32 and D36 high-strengh hull structural steel plate of using oxygen blowing converter,LF refining,slab continuous caster and TMCP.

通过对化学成分合理设计及制订适合本厂的冶炼、连铸、轧制工艺,采取微合金化技术和控轧控冷技术相结合的有效措施,提高钢板的综合性能,特别是低温冲击韧性。

High strength and low cost wheel steel for commercial vehicles,whose ferrite grain size is 4-6 μm and the tensile strength of which is up to 550 MPa,was developed by accurate composition adjustment(trimming) and TMCP.

通过对普碳钢进行成分微调以及利用控轧控冷工艺在本钢热连轧生产线上开发研制了晶粒尺寸为4~6μm,抗拉强度达550 MPa的低成本高强度商用车车轮钢板。

3) TMCP

热机轧制

Effect of TMCP on Structure and Performance of Middle Carbon Cold Heading Steel;

热机轧制对中碳冷镦钢组织和性能的影响

4) TMCP

机械热处理

The Development of TMCP and Relaxation-Precipitation-Control Transformation(RPC) Technology;

机械热处理工艺的发展及弛豫—析出—控制相变技术

By a special thermomechanical control process(TMCP-RPC), relaxation for a certain time after control rolling and then direct quenching/accelerated cooling, the strain induced precipitions and defect structure in deformed austenite resulted in refinement of intermediate transformation microstructure.

利用一种特殊的机械热处理工艺技术，即在控轧终轧后经过一段控制时间与温度的弛豫，使得基体中出现应变诱导析出以及变形奥氏体中缺陷组态重组，在随后的直接淬火或加速冷却过程中，获得细化的板条贝氏体／马氏体组织。

5) TMCP

TMCP钢

LOW Temperature CTOD Toughness Test for E40-Z35 Heavy Plate Produced by TMCP;

TMCP钢E40-Z35厚钢板低温CTOD韧性试验

6) TMCP

热机械轧制工艺

36% C) was thermo-mechanically deformed and subsequent controlled cooled (TMCP) to obtain refined microstructure with spheroidized cementite.

采用热机械轧制工艺可使中碳钢(0。

参考词条

TMCP technology TMCP parameters TMCP and normalizing process TMCP Steel of 490MPa Grade third generation TMCP TMCP-RPC-T process J55 TMCP process New Generation TMCP Tech 服务发现中间件贵阳市公安局交通警察支队

补充资料：amgard tmcp

CAS: 13674-84-5
分子式: C9H18Cl3O4P
分子量: 327.57
中文名称: TCPP；三(1-氯化异丙基)、磷酸三(2-氯丙基)酯、磷酸三(1-氯-2-丙基)酯、磷酸三(B-氯丙基)酯

英文名称: TCPP；2-Propanol, 1-chloro-, phosphate (3:1)；phosphoric acid, tris(2-chloro-1-methylethyl) ester；1-chloro-2-propano phosphate；amgard tmcp

性状：纯净的磷酸三(2-氯丙基)酯是无色透明油状液体，比重(25°C/25°C)1.29，折光率N20D1.46，闪点(开口杯法)180°C，氯含量32.5%，磷含量9.46%，粘性：65mps25°C，溶于乙醇、氯仿等有机溶剂，不溶于脂肪烃类，水溶性小于1%。

指标名称指标
外观无色或淡黄色油状透明液体
色泽(Pt-Co) ≤100号
酸值(mgKOH/g) ≤0.10
水份(w/w)% ≤0.20

产品用途：本品主要用于软(硬)质聚氨酯泡沫，环氧树脂、聚苯乙烯、丙烯酸、醋酸纤维素、乙基纤维素树脂和酚醛塑料，聚醋酸乙烯脂，及枪式泡沫填缝剂的生产。特别推荐用于刚性聚氨酯泡沫中具有优秀的热导及水解稳定性，特别适合于ASTME84(Ⅱ级)，用于化合聚氨酯泡沫和不饱和聚酯树脂及酚醛塑料在低温具有低粘性。

贮运和包装：本品用无衬里镀锌桶(250Kg/桶)包装，贮存温度在5-38°C之间，长期存放时，不能超过35°C，并要保持空气干燥。按一般化学品规定贮运。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引 TMCP process TMCP process

1) TMCP TMCP 1. To Improve the Properties of Quasi-bainitic Wear Resistant Plate by Means of TMCP Process; 通过TMCP工艺改善准贝氏体耐磨钢板性能 2. Effect of TMCP on Microstructure and Mechanical Properties of Low Carbon-Manganese Steel; TMCP对低碳锰钢组织和力学性能的影响 3. TMCP of Upgraded Q235 Plate; 升级Q235中厚板的TMCP工艺研究 2) TMCP 控轧控冷 1. This paper introduces the process route for producting D32 and D36 high-strengh hull structural steel plate of using oxygen blowing converter,LF refining,slab continuous caster and TMCP. 通过对化学成分合理设计及制订适合本厂的冶炼、连铸、轧制工艺,采取微合金化技术和控轧控冷技术相结合的有效措施,提高钢板的综合性能,特别是低温冲击韧性。 2. High strength and low cost wheel steel for commercial vehicles,whose ferrite grain size is 4-6 μm and the tensile strength of which is up to 550 MPa,was developed by accurate composition adjustment(trimming) and TMCP. 通过对普碳钢进行成分微调以及利用控轧控冷工艺在本钢热连轧生产线上开发研制了晶粒尺寸为4~6μm,抗拉强度达550 MPa的低成本高强度商用车车轮钢板。 3) TMCP 热机轧制 1. Effect of TMCP on Structure and Performance of Middle Carbon Cold Heading Steel; 热机轧制对中碳冷镦钢组织和性能的影响 4) TMCP 机械热处理 1. The Development of TMCP and Relaxation-Precipitation-Control Transformation(RPC) Technology; 机械热处理工艺的发展及弛豫—析出—控制相变技术 2. By a special thermomechanical control process(TMCP-RPC), relaxation for a certain time after control rolling and then direct quenching/accelerated cooling, the strain induced precipitions and defect structure in deformed austenite resulted in refinement of intermediate transformation microstructure. 利用一种特殊的机械热处理工艺技术，即在控轧终轧后经过一段控制时间与温度的弛豫，使得基体中出现应变诱导析出以及变形奥氏体中缺陷组态重组，在随后的直接淬火或加速冷却过程中，获得细化的板条贝氏体／马氏体组织。 5) TMCP TMCP钢 1. LOW Temperature CTOD Toughness Test for E40-Z35 Heavy Plate Produced by TMCP; TMCP钢E40-Z35厚钢板低温CTOD韧性试验 6) TMCP 热机械轧制工艺 1. 36% C) was thermo-mechanically deformed and subsequent controlled cooled (TMCP) to obtain refined microstructure with spheroidized cementite. 采用热机械轧制工艺可使中碳钢(0。参考词条 TMCP technology TMCP parameters TMCP and normalizing process TMCP Steel of 490MPa Grade third generation TMCP TMCP-RPC-T process J55 TMCP process New Generation TMCP Tech 服务发现中间件贵阳市公安局交通警察支队补充资料：amgard tmcp CAS: 13674-84-5 分子式: C9H18Cl3O4P 分子量: 327.57 中文名称: TCPP；三(1-氯化异丙基)、磷酸三(2-氯丙基)酯、磷酸三(1-氯-2-丙基)酯、磷酸三(B-氯丙基)酯英文名称: TCPP；2-Propanol, 1-chloro-, phosphate (3:1)；phosphoric acid, tris(2-chloro-1-methylethyl) ester；1-chloro-2-propano phosphate；amgard tmcp 性状：纯净的磷酸三(2-氯丙基)酯是无色透明油状液体，比重(25°C/25°C)1.29，折光率N20D1.46，闪点(开口杯法)180°C，氯含量32.5%，磷含量9.46%，粘性：65mps25°C，溶于乙醇、氯仿等有机溶剂，不溶于脂肪烃类，水溶性小于1%。指标名称指标外观无色或淡黄色油状透明液体色泽(Pt-Co) ≤100号酸值(mgKOH/g) ≤0.10 水份(w/w)% ≤0.20 产品用途：本品主要用于软(硬)质聚氨酯泡沫，环氧树脂、聚苯乙烯、丙烯酸、醋酸纤维素、乙基纤维素树脂和酚醛塑料，聚醋酸乙烯脂，及枪式泡沫填缝剂的生产。特别推荐用于刚性聚氨酯泡沫中具有优秀的热导及水解稳定性，特别适合于ASTME84(Ⅱ级)，用于化合聚氨酯泡沫和不饱和聚酯树脂及酚醛塑料在低温具有低粘性。贮运和包装：本品用无衬里镀锌桶(250Kg/桶)包装，贮存温度在5-38°C之间，长期存放时，不能超过35°C，并要保持空气干燥。按一般化学品规定贮运。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com