1) hot-dip
热浸镀
1.
The application of grey model GM(1,1) in the research of sea-water corrosion resistance of hot-dip coatings;
灰色GM(1,1)模型在热浸镀层耐海水腐蚀研究领域的应用
2.
Effect of Ti addition on hot-dip zinc coating;
添加钛元素对热浸镀锌层性能的影响
3.
The Influence of Diffusion Annealing on the Organization of Hot-dipped Aluminum Coating on the Ductile Iron;
扩散退火对球墨铸铁热浸镀铝组织的影响
2) hot dipping
热浸镀
1.
Research on the material of hot dipping pot for 55% Al-Zn alloy layer;
应用于热浸镀55%铝锌合金锅体材料的研究
2.
This paper dealt with some of hot dipping 55%Al-Zn fluxes for un-hardened and tempered N80 steel.
研究了石油管常用材质非调质N80钢热浸镀55%Al-Zn合金的助镀工艺,确定了最佳助镀方法为电解活化加浸4%K2ZrF6水溶液的助镀法。
3) hot dip
热浸镀
1.
Seawater corrosion behavior of hot dip coatings at Qingdao test station(Ⅰ)——Immersion zone;
热浸镀层在青岛站的海水腐蚀行为对比(Ⅰ)——全浸区
2.
A new type of hot dipping auxiliary is selected by lots of tests for Zn-Al-Mg alloy coating.
热浸镀是一种经济而有效的钢铁材料表面处理方法,由于其工艺简单、防腐蚀性能良好而被普遍使用,随着科学技术的发展和人类社会的进步,传统的镀层种类已不能满足防腐蚀的需要,这就需要开发出性能优良的新型合金镀层。
3.
The effects of different elements on the growth of alloyed layers in the hot dip steel were researched,the morphology and structure of the coating were explored and the formation and growth mechanism of alloy layers were analyzed.
研究了钢铁热浸镀镀液中添加不同元素对合金层生长的影响,检测了镀层的形貌和结构并分析了合金层形成和生长的机理。
4) hot-dipping
热浸镀
1.
This paper analyses the microstructures of hot-dipping Zn-Al-RE alloy caotings by means of metallograph,SEM and XPS and tests its corrosion resistance with the result that,by adding Al-RE the Fe-Zn compouds in the coating turn into Fe-Al-Zn compounds which is fine and even when forming at the temperature of Zn-coating.
用光学金相、扫描电镜、能谱分析等手段分析了热浸镀锌铝稀土合金的组织,测验了在多种环境下的耐蚀性。
2.
The development and application of hot-dipping and hot-spraying is especially discussed.
简要介绍了表面工程技术的概念和产生背景,并以热浸镀、热喷涂为重点介绍了表面工程的发展和应用。
3.
Through orthogonal experiments of hot-dipping coating process, the effect of various additives to 55%Al-Zn alloy coating on the coating quality was studied and a optimized composition of additives for Al-Zn alloy coating was pecified.
用正交试验的方法研究了助镀剂对热浸镀55%铝锌合金镀层表面质量的影响,找出了较佳的助镀剂配方,并就助镀剂与表面的作用机理进行了探讨。
5) hot-dipped
热浸镀
1.
Development on system control for hot-dipped production;
热浸镀生产控制系统的研制
2.
Status and Advance on Hot-dipped Aluminium;
热浸镀渗铝技术的研究现状及进展
3.
The ceramic coatings were obtained by micro-arc oxidation of hot-dipped aluminum coatings on stainless steel.
采用不锈钢热浸镀铝后再进行微弧氧化的办法在不锈钢表面形成氧化陶瓷层。
6) hot dip aluminizing
热浸镀铝
1.
Kinetic Study of High Temperature Oxidation of Hot Dip Aluminizing Steel;
钢材热浸镀铝抗高温氧化的动力学研究
2.
Cyclic oxidation behavior in water-vapour atmosphere of ferritic-martensitic steel T91 coated by hot dip aluminizing
T91钢热浸镀铝及其在水蒸汽中的循环氧化行为
3.
A brief introduction of the principles,methods(Cook-northnan,and Sendzimir),research development and industrial applications of hot dip aluminizing technology was presented.
介绍了热浸镀铝技术的原理和熔剂法、森吉米尔法两种主要工艺,概括了热浸镀铝技术的研究进展和工业应用趋势,指出加入适量的稀土元素在热浸镀层中能有效地改善镀层耐蚀性、耐高温氧化性、成形性和装饰性。
补充资料：热浸镀
分子式：
CAS号：
性质：又称熔融镀（fuse dipping）。将工件浸入熔融的金属液中，以获得金属镀层的过程。能用于热浸镀的金属只是熔点较低的金属及其合金。如锡、锌、铝、铅锡合金等。基体材料一般是钢铁，有时也用铜。浸镀前工件需进行表面预处理，清除表面的油污和氧化皮。热浸镀后还要进行化学处理、涂油或必要的整形。热浸镀的优点在于得到的镀层较厚，能在较恶劣的环境中长期使用。如用于高速公路的护栏、桥梁和建筑材料。但浸镀层厚度和均匀性不易控制，外观也不如电镀层好。优点是：（1）操作和设备简单；（2）效果比电镀好。缺点是：（1）覆盖层较厚；（2）不规则的制件不容易形成均匀的膜；（3）只适于用低熔点金属（锌、锡、铝、铅）覆盖。
CAS号：
性质：又称熔融镀（fuse dipping）。将工件浸入熔融的金属液中，以获得金属镀层的过程。能用于热浸镀的金属只是熔点较低的金属及其合金。如锡、锌、铝、铅锡合金等。基体材料一般是钢铁，有时也用铜。浸镀前工件需进行表面预处理，清除表面的油污和氧化皮。热浸镀后还要进行化学处理、涂油或必要的整形。热浸镀的优点在于得到的镀层较厚，能在较恶劣的环境中长期使用。如用于高速公路的护栏、桥梁和建筑材料。但浸镀层厚度和均匀性不易控制，外观也不如电镀层好。优点是：（1）操作和设备简单；（2）效果比电镀好。缺点是：（1）覆盖层较厚；（2）不规则的制件不容易形成均匀的膜；（3）只适于用低熔点金属（锌、锡、铝、铅）覆盖。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条