1) wheel steel
车轮钢
1.
In situ study of deformation and fracture process in wheel steel and effect of hydrogen;
车轮钢形变断裂过程的原位研究及氢影响
2.
Effect of extended nozzle and argon sealing during round bloom casting on wheel steel quality;
长水口氩封保护对圆坯和车轮钢质量的影响
3.
Nitrogen pick up during melting process for wheel steel and the metallurgical process improvement;
车轮钢冶炼过程氮含量的变化规律及工艺改进
2) train wheel steel
车轮钢
1.
Thermal-mechanical fatigue performance of train wheel steel;
车轮钢热—机械疲劳性能的研究
2.
Based on finite element analysis of train wheel/rail friction and experimental data of train wheel steel phase transformation, the mechanism of thermal fatigue under high speed and heavy load conditions was simulated.
通过降碳来降低车轮钢奥氏体相变的临界点,可以显著抑制踏面马氏体层的形成。
3) cast steel wheel
铸钢车轮
1.
The reasons of regular entrapped slag of rhe cast steel wheel poured continuously by bottom pouring ladle were explained by using hydrodynamics.
用流体力学原理解释了用底注包连续浇注铸钢车轮过程中产生规律性夹渣缺陷的原因——是由于钢液在孔口出流时产生的真空,使钢液中的气体连同它所吸附的氧化渣一起析出附着在水口砖表面上,当多到一定程度脱落流入铸型中造成的。
2.
The forming reasons of blowhole and cinder inclusion in cast steel wheel were analyzed, and the correspounding precaution measures were proposed which have been verified in producing practice.
分析了铸钢车轮件气孔、夹渣缺陷的形成原因,提出了相应的解决措施,并在生产中得到验证,使废品率显著下降。
3.
On the basis of the comparison with the simulated rolled steel wheel tread materials, test and research are made on the abrasion resistance and contact fatigue performance of the materials of ZL-B cast steel wheel treads.
在与模拟辗钢轮踏面材料对比的基础上,对ZL—B铸钢车轮踏面材料的耐磨性和接触疲劳性能进行了试验研究。
4) cast-steel wheel
铸钢车轮
1.
The producing reasons of crack in cast-steel wheel and gear have been found out by practice experiment and computer numerical simulation.
采用现场实测和计算机数值模拟找出了铸钢车轮及齿轮产生裂纹的原因，提出了相应的防止措施，并在生产中得到验证，使废品率下降，显著提高了经济效益。
2.
In order to increase the wheel quality and meet the requirement of speed increase and heavy haul, numerical simulation was employed to study the production process of cast-steel wheel.
铸钢车轮因其工艺流程短,工艺简单,成本低廉,铸造精度高等优点,逐渐占据了国内货车市场上的一定空间,并呈增长的趋势。
3.
The formation mechanism and distribution law of shrinkage of cast-steel wheel were simulated.
采用View Cast软件对铸钢车轮辐板处疏松缩孔的形成机理及分布规律进行了数值模拟研究。
5) Steel wheel
钢制车轮
1.
In recent years facing the challenges of substitutes the international steel wheel industry has made more investments in research and development concerning new material,new style and new technics in addition to their original safety advantage of steel wheel.
近年来,国际钢制车轮面对替代产品的挑战,利用钢轮固有的安全性能优势在材料、款式和工艺等方面追加投入并进行研究。
补充资料：车轮轮箍轧机生产的车轮(马鞍山钢铁公司)
车轮轮箍轧机生产的车轮(马鞍山钢铁公司)
车轮轮箍轧机生产的车轮(马鞍山钢铁公司)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条