1) anionic polymerization
阴离子聚合
1.
Numerical simulation of reactive extrusion processes for anionic polymerization of styrene;
苯乙烯阴离子聚合反应挤出过程的数值模拟
2.
Chemical calorific effect during reactive extrusion process for anionic polymerization;
阴离子聚合反应挤出过程的化学热效应
3.
Polar additives in anionic polymerization;
阴离子聚合反应中的极性调节剂
2) anion polymerization
阴离子聚合
1.
Octamethylcyclotetrasiloxane(D4)and N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane(KH-792) were chosen to synthesize aminopolysiloxane by bulk anion polymerization,with KOH as catalyst,hexamethyldisiloxane(MM)used as end capping agent,and dimethyl sulfoxide(DMSO) utilized as accelerating agent.
以八甲基环四硅氧烷(D4)和N-β-氨乙基-γ氨丙基甲基二甲氧硅烷(KH-792)为原料,用KOH作为催化剂,六甲基二硅氧烷(MM)为封端剂,二甲基亚砜(DMSO)为促进剂,采用本体阴离子聚合法合成了氨基封端的聚硅氧烷,对其结构用红外光谱进行了表征。
2.
We synthesized (SI)_4Si star-type block copolymer with styrene,isoprene and silicon tetrachloride as raw materials,tetrahydrofuran as molecular weight regulator,cyclohexane as solvent,and n-BuLi or naphthalene lithium as initiating agent by anion polymerization method with three steps.
采用阴离子聚合法,以苯乙烯、异戊二烯、四氯化硅为原料,以四氢呋喃(THF)为分子量调节剂,正丁基锂或萘锂为引发剂,环己烷为溶剂,分3步加料,合成(SI)4Si星型嵌段共聚物。
3.
Synthesis methods of PFPE are mainly anion polymerization of perfluoro-epoxide and photo-initiated oxidation of perfluoro-olefine.
其合成方法主要有全氟环氧化物的阴离子聚合法和全氟烯烃直接光氧化法2种。
3) anionic copolymerization
阴离子聚合
1.
This paper reviews various methods of synthesis of hydrophobically associating water-soluble polymers,including copolymerization of acrylamide with hydrophobic monomers(heterogeneous process,homogeneous process,micellar copolymerization,inverse microemulsion process,emulsion process without emulsifying agents and anionic copolymerization)and macromolecular reactions.
综述了疏水缔合型水溶性聚合物及其合成方法,包括共聚合法(非均相、均相、胶束、反相微乳液、无皂乳液以及阴离子聚合)和大分子反应法。
4) anionic polymerization
负离子聚合，阴离子聚合
5) anionic in-situ polymerization
阴离子原位聚合
1.
Casting nylon 6(MC nylon 6)/TiO 2nanocomposites were prepared through anionic in-situ polymerization, and their structures and properties were characterized.
利用阴离子原位聚合法制备了铸型尼龙 6 (MC尼龙 6 ) /TiO2 原位纳米复合材料 ,并对其结构与性能进行了表征。
6) anionic slurry polymerization
阴离子淤浆聚合
1.
Study on properties of nylon 6 prepared via anionic slurry polymerization;
阴离子淤浆聚合尼龙6的性能研究
补充资料：阴离子聚合
分子式：
CAS号：
性质：催化剂的负离子(如㈠:NH2，R:㈠)直接与单体反应形成碳负离子活性中心，经引发反应产生的负离子活性中心同单体进一步加成，又产生新的碳负离子，使链不断增长的聚合反应。适合阴离子聚合的烯类单体都带吸电子基团，如丙烯腈、丙烯酸甲酯、苯乙烯和丁二烯等都能进行阴离子聚合。阴离子聚合的催化剂是亲核试剂。
CAS号：
性质：催化剂的负离子(如㈠:NH2，R:㈠)直接与单体反应形成碳负离子活性中心，经引发反应产生的负离子活性中心同单体进一步加成，又产生新的碳负离子，使链不断增长的聚合反应。适合阴离子聚合的烯类单体都带吸电子基团，如丙烯腈、丙烯酸甲酯、苯乙烯和丁二烯等都能进行阴离子聚合。阴离子聚合的催化剂是亲核试剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条