1) Flexible Thin Slab Rolling
柔性化薄板坯连铸连轧
2) flexible-thin slab rolling(FTSR)
柔性化薄板坯连铸连轧(FTSR)
3) thin slab casting and rolling
薄板坯连铸连轧
1.
Development of V Microalloy HSLA Steel Produced by Thin Slab Casting and Rolling Process;
薄板坯连铸连轧流程V微合金化HSLA钢的开发
2.
On the prospect of technological innovation for thin slab casting and rolling in china;
我国薄板坯连铸连轧技术创新前景广阔
3.
Introduction to converter-thin slab casting and rolling project in WISCO
武钢转炉-薄板坯连铸连轧工程简介
4) thin slab continuous casting and rolling
薄板坯连铸连轧
1.
Quality analysis and control of HR sheet/coil from thin slab continuous casting and rolling line;
薄板坯连铸连轧产品质量分析及控制
2.
Experimental research on nitrogen pickup of molten steel in the process of thin slab continuous casting and rolling;
唐钢薄板坯连铸连轧钢液增氮的试验研究
3.
Objective analysis on thin slab continuous casting and rolling technology
对薄板坯连铸连轧技术的客观分析
5) thin slab continuous casting and continuous rolling
薄板坯连铸连轧
1.
Ferrite rolling process of low carbon steel strips in the thin slab continuous casting and continuous rolling line of Tang Steel was introduced.
介绍了唐钢薄板坯连铸连轧生产线利用铁素体轧制工艺生产低碳冷轧基板的生产工艺,分析了铁素体轧制工艺参数对钢板组织与性能的影响,为采用铁素体轧制生产性能良好的低碳软钢奠定了一定的基础。
2.
A general description about furnace rolls refractory maintains of thin slab continuous casting and continuous rolling is introduced.
介绍了薄板坯连铸连轧加热炉的炉辊耐材修复情况,针对存在的问题开发了免烘烤浇注料,并简要介绍了免烘烤浇注料在炉辊耐材修复的应用情况。
3.
The technology processing,equipment parameters and automatic electric control system were introduced of the thin slab continuous casting and continuous rolling line of Handan Iron and Steel Co.
介绍了邯郸钢铁集团有限责任公司薄板坯连铸连轧生产线的工艺流程、设备参数和电气自动控制系统 ,指出了生产中存在的问题 ,并提出了相应的预防措施 ;同时简要介绍了该生产线二期工程的规
6) compact strip production
薄板坯连铸连轧
1.
A precipitation model of NbC during deformation of compact strip production(CSP) was established based on the classical nucleation theory.
本文在经典形核和长大理论模型的基础上,建立了适用于薄板坯连铸连轧(CSP)变形过程中NbC析出的动力学模型。
2.
Based on the characteristics of compact strip production (CSP), according to precipitation regularity and different functions of microalloying element Nb in steel, a series of micro-alloyed steel, pipeline steel and so on have been successfully exploited by Baogang through properly selecting micro-alloy element Nb and its adding amount and strictly controlling smelting and rolling process.
针对薄板坯连铸连轧的工艺特点,根据Nb在钢中的析出规律和作用机理,包钢合理选择微合金化元素Nb及其添加量,并通过严格的冶炼和轧制工艺控制,成功地开发出管线钢等系列产品,对钢中的组织进行了研究,探讨了薄板坯连铸连轧条件下含铌微合金钢的强韧化机理。
3.
The technology of Compact Strip Production was a new producing hot rolling steel strips process received successfully in 1980s.
薄板坯连铸连轧(Compact Strip Production)是20世纪80年代成功开发的一种全新的生产热轧板卷新工艺,其投资运行成本低,产品晶粒细小,产品强度高,板形及尺寸精度高等优点,但同时也存在一些缺点,例如:以CSP工艺下的热轧板料作为冷轧原料得到的冷轧板其深冲性能目前为止不如传统工艺下得到的冷轧板深冲性能好,这与CSP工艺下供冷轧用料的热轧板料的组织、强度以及冷轧过程,退火过程中组织和织构演变规律控制有关。
补充资料：红色前哨连
原中国人民公安部队某部第 6连的荣誉称号。1952年1月进驻广东省宝安县沙头角镇担负守卫任务。 沙头角镇南临香港九龙新界，镇上一条中心街道被分成两半，一边属中华人民共和国管辖，一边为香港英国当局租借地。该连在沙头角镇执勤12年，粉碎了国民党特务和坏分子的多次破坏、捣乱，抵制了资本主义腐朽思想的侵蚀,出色地完成了守卫任务,荣立集体二等功。1964年6月27日，中华人民共和国国防部授予该连"红色前哨连"称号。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条