1) spouted bed
喷动床
1.
Kinetic simulation of two-dimensional spouted bed with draft plates by discrete element method;
二维导流管喷动床离散颗粒动力学模拟
2.
Study of semi-dry flue gas desulfurization with spray spouted bed;
喷雾-喷动床半干法烟气脱硫研究
3.
Technology optimization of drying wheat by spouted bed with draft tube;
导向管喷动床小麦干燥工艺优化研究
2) spouted bed with multi-nozzle
多喷口喷动床
3) spouted-fluidized bed
喷动流化床
1.
Experimental study on coal gasification and desulphurization in a pressurized spouted-fluidized bed gasifier;
增压喷动流化床煤部分气化与脱硫效率的试验研究
2.
A pressurized spouted-fluidized bed experiment was performed on an organic-glass cold model device with an inner diameter of 100 mm.
在内径100mm的有机玻璃冷模装置上进行了加压喷动流化床试验。
3.
The effects of operating factors, such as spouting velocity, fluidizing velocity, pressure and particle size on solid circulating rate in a spouted-fluidized bed with draft tube were investigated.
实验考察了喷动气速度、流化气速度、压力以及颗粒尺寸对增压导向式喷动流化床固体颗粒循环速率的影响规律，并归纳出关联式，为正在开发的第二代增压流化床联合循环发电系统(2GPFBC-CC)中关键部件—炭化炉的放大设计提供了帮助。
4) spout-fluid bed
喷动流化床
1.
Particle-scale based DEM simulation of particle motion spout-fluid bed;
基于颗粒尺度DEM直接数值模拟的喷动流化床颗粒运动特性
2.
Experiment study on coal gasification in pressurized spout-fluid bed;
加压喷动流化床煤部分气化试验
3.
Three-dimensional numerical simulation of gas-solid flow behavior in spout-fluid bed;
喷动流化床气固流动特性的三维数值模拟
5) Spout-fluidized bed
喷动流化床
1.
The simulation was carried out using standard k-ε model to study the rotational gas flow field in spout-fluidized bed based on Fluent software.
基于Fluent软件,采用标准k-ε双方程模型对喷动流化床内气相旋流流场进行了数值模拟,获得了有利于造粒和包衣操作的流动结构,并通过试验测量验证了预测结果的可靠性。
2.
The hydrodynamics behavior of spout-fluidized bed with a draft tube has been investigated.
本文研究对带导流管喷动流化床内的湍流气固两相流的流体力学特性,实验测定导流管安装高度、喷动气速和床层高度对床层压降的影响;并对不同操作条件下喷动流化床内的流场进行二维非稳态的数值模拟计算,模拟结果与实验数据吻和较好。
3.
The composition and combustion characteristics of bio-oil prepared in a spout-fluidized bed reactor, which designed maximum capacity is 5kg/h of sawdust as feeding material, were investigated by GC-MS and thermogravimetry.
对生物质在处理量为5 KG／H的小型生物质喷动流化床快速裂解装置中获得的液体产物进行了组成和燃烧特性的分析。
6) two-dimensional spouted bed
二维喷动床
1.
Experimental investigations on pulsant behaviors of particle flow were carried out on a two-dimensional spouted bed using PIV.
二维喷动床横截面为152mm×15mm,锥角为60°,喷口宽度为9mm,实验物料为平均粒径2。
补充资料：喷动床
分子式：
CAS号：
性质：喷动床是一种特殊条件下的流化床。气体通过一个小孔或喷嘴骤然喷入，在床层中央形成一个强大的射流，中央射流内的固体颗粒被气流夹带而上，达到一定高度后，由于物料本身的重力作用而下降，以后又被气流重新向上带起而呈喷泉状。可以设计为间歇式或连续式。用于粗颗粒物料（如小麦、稻谷、油菜子等）的干燥，以及化学肥料的造粒和干燥等。
CAS号：
性质：喷动床是一种特殊条件下的流化床。气体通过一个小孔或喷嘴骤然喷入，在床层中央形成一个强大的射流，中央射流内的固体颗粒被气流夹带而上，达到一定高度后，由于物料本身的重力作用而下降，以后又被气流重新向上带起而呈喷泉状。可以设计为间歇式或连续式。用于粗颗粒物料（如小麦、稻谷、油菜子等）的干燥，以及化学肥料的造粒和干燥等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条