1) 45 steel
45钢
1.
Effect of induction hardening on rolling wear properties of 45 steel;
表面感应淬火对45钢滚动磨损特性的影响
2.
Design of Die for 45 Steel Valve Body in Extruded Casting;
45钢阀体挤压铸造模具设计
3.
Result analysis of the CCT curve 45 steels measured by Gleeble 1500;
Gleeble1500测定45钢CCT曲线的结果分析
2) steel 45
45钢
1.
Microstructure and Property of Plasma Immersion Ion Implanted Layer in Steel 45;
45钢等离子体浸没式离子注入层的组织与性能
2.
The relationship between magneto-vibration and magnetic treatment induced tensile residual stress reduction in the steel 45 was studied.
研究了45钢脉冲磁处理过程中残余拉应力与磁致振动之间的相互作用关系。
3.
After steel 45 is superficially consolidated with alloy powder WC.
通过对45钢采用预引入法涂敷WC、Co、TiC、Ti、N i、N iCr、Cr2C3、B4C等合金粉末进行表面强化,分析了强化后的表面性能,结果表明,经处理后的材料回火稳定性、表面硬度和耐磨性等均显著提高,使其可替代模具钢制造部分模具工作零件。
3) 45# steel
45钢
1.
The research and improvement of heat treatment technology to 45# steel;
关于45钢热处理工艺的研究和改进
2.
Sprayed to cool auto axle tubes made from 45# steel to 620 ℃ and tempered under high temperature.
对45钢汽车轮毂轴管进行喷雾强制冷却+620℃高温自回火热处理,并对处理后的硬度值进行检测、分析;为配合该工艺的顺利实施,自制了专用喷雾冷却装置,结果表明,用该工艺处理后的汽车轮毂轴管质量稳定、产品性能波动小,满足技术要求。
3.
The induction heating process before forging of 45# steel has been analyzed with considering the volatilization of magnetic force line in the end and the movement of workpiece.
对45钢坯锻前感应加热的过程进行了模拟分析,在模拟过程中考虑到了端部磁力线的逸散和工件的运动,得到了工件温度随时间的变化曲线;并分析了感应加热整个温升过程的特点与影响因素。
4) 45 carbon steel
45钢
1.
The effect of heating temperature for recovering fatigue damage on accumulated fatigue life of 45 carbon steel has been investigated.
通过试验研究了恢复加热温度对45钢疲劳损伤后累积疲劳寿命的影响。
2.
In order to describe the cyclic softening behavior of materials more exactly,a cyclic plastic constitutive model was proposed based on the deformation character of quenched-tempered 45 carbon steel under symmetrical and unsymmetrical cyclic loadings.
为了更好地描述材料的循环软化行为,基于调质处理的45钢在对称与非对称应变循环加载下的变形特征,建立了其循环塑性本构模型。
5) 45~# steel
45#钢
1.
While argon is being blown into the molten steel container 45~# steel plank ingot is produced in course of converter smelting and continuously casting carbon steel.
采用转炉冶炼一钢包吹氩-连铸生产板坯45#钢。
2.
Three kinds of anti-wear coatings of 1Cr13, 3Cr13 and T8 were made on 45~# steel by arc spraying.
采用电弧喷涂法在45#钢表面制备了1Cr13,3Cr13,T8三种防磨损涂层,通过硬度、强度、磨损试验性能测试、用碳硫分析仪检测其碳元素含量及在金相显微镜上观察其组织形貌的方法,对3种涂层的性能给出了综合评价。
3.
The surface modification of 45~# steel bombarded by high-current pulsed electron beam was studied and microstructure and surface modification were analysed and discussed.
利用强流脉冲电子束对45#钢进行了表面改性处理,并对其显微组织和改性机制进行了分析和讨论。
6) 45 steel
45#钢
1.
By analysis of 45 steel heat treatment property,the traditional quenching heating pattern and cooling medium for 45 steel heat treatment are changed,which effetively controls quenching crack and heightens heat treatment quality.
分析了45#钢材料热处理特性,改变了传统45#钢热处理淬火加热方式及冷却介质,有效控制了45#钢热处理淬火裂纹,提高了45#钢热处理质量。
补充资料：mytj 45
分子式：
CAS号：
性质：又称聚氧乙烯(8)硬脂酸酯，聚乙二醇单硬脂酸酯400，买泽45。单酯：RCOO(CH2CH2O)nH；双酯:RCOO(CH2CH2O)nOCR；游离多元醇：HO(CH2CH2O)nH。本品是聚乙二醇的单硬脂酸酯和二硬脂酸酯的混合物，渗入有乙醇。乳白色微具有脂肪臭和微苦脂肪味的蜡状固体，密度为1.0g/cm3，凝结温度27～29℃。可分散于热水中，溶于乙醇、丙酮、四氯化碳、二噁烷、乙醚和甲醇，在轻石油、液体石蜡、不挥发油中形成混浊液。聚合物平均长度相当于8个氧乙烯单元。先由甘油和硬脂酸作不完全酯化，然后由环氧乙烷与α-单硬脂酸按7.5:1(mol)浓度进行反应，最后浓缩制得。在制药工业中主要作为乳化剂和增溶剂，用于制备乳剂、霜剂等。也是食品添加剂，广泛用于食品的制造。注意：本品与酸、碱、酚、碘化钾、鞣酸、铋、汞、银盐有配伍禁忌；置于密闭容器中，贮存于阴凉干燥处。
CAS号：
性质：又称聚氧乙烯(8)硬脂酸酯，聚乙二醇单硬脂酸酯400，买泽45。单酯：RCOO(CH2CH2O)nH；双酯:RCOO(CH2CH2O)nOCR；游离多元醇：HO(CH2CH2O)nH。本品是聚乙二醇的单硬脂酸酯和二硬脂酸酯的混合物，渗入有乙醇。乳白色微具有脂肪臭和微苦脂肪味的蜡状固体，密度为1.0g/cm3，凝结温度27～29℃。可分散于热水中，溶于乙醇、丙酮、四氯化碳、二噁烷、乙醚和甲醇，在轻石油、液体石蜡、不挥发油中形成混浊液。聚合物平均长度相当于8个氧乙烯单元。先由甘油和硬脂酸作不完全酯化，然后由环氧乙烷与α-单硬脂酸按7.5:1(mol)浓度进行反应，最后浓缩制得。在制药工业中主要作为乳化剂和增溶剂，用于制备乳剂、霜剂等。也是食品添加剂，广泛用于食品的制造。注意：本品与酸、碱、酚、碘化钾、鞣酸、铋、汞、银盐有配伍禁忌；置于密闭容器中，贮存于阴凉干燥处。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条