说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 激光修锐
1)  laser dressing
激光修锐
1.
Experimental research on laser dressing of bronze bond diamond grinding wheel;
青铜结合剂金刚石砂轮激光修锐试验研究
2.
The methods to dress diamond grinding wheel using assistant side blowing and to measure grinding force with simplifying process were presented,in which grinding force,grinding force ratio and specific grinding energy were computed and the comparison between the results before and after laser dressing verified the effectiveness of laser dressing from different aspects.
介绍了辅助侧向吹气法金属结合剂金刚石砂轮的激光修锐试验和简化测力评价方法,计算比较了修锐前后砂轮磨削力、磨削力比和比磨削能,从不同角度说明了辅助侧向吹气法对激光修锐金属结合剂金刚石砂轮的有效性。
3.
Experimental studies on laser dressing of resin - bonded CBN grinding wheels by an acoustic - optic Q - switched Nd: YAG pulsed laser in wheels radial orientation were earned out.
研究了单脉冲激光辐照下,平均功率、脉冲频率和离焦量等参数对烧蚀凹坑深度的影响,由此可方便获得合适的激光修锐参数;分析了声光调Q YAG脉冲激光修锐树脂CBN砂轮的选择性去除机理。
2)  dressing [英]['dresɪŋ]  [美]['drɛsɪŋ]
修锐
1.
A mist-jetting electrical discharge truing and dressing technology was proposed.
利用电火花成形机床进行雾气中电火花修锐青铜结合剂金刚石砂轮的实验,研究了修整过程中的不同放电参数对修整效率的影响。
2.
Experiments on ablation and dressing of resin-bonded CBN grinding wheels by single laser pulse and by pulse laser respectively have been carried out to analyze dressing mechanism and disciplines of dressing effects influenced by laser and technology parameters.
本文从试验和数值模拟两方面对声光调Q Nd:YAG脉冲激光径向修锐树脂结合剂CBN砂轮进行研究。
3.
In this paper,three characteristic parameters,namely,the valid grit protrusion height,the grit protrusion angle,and the grit protrusion homomorphy,are proposed to correctly evaluate the microscopic protrusion topography of grits after the dressing of the diamond grinding wheel.
针对金刚石砂轮修锐后磨粒微观出刃形貌很难评价的问题,建立了有效磨粒出刃高度、磨粒出刃角和磨粒出刃同形度的特征参数模式。
3)  sharpening [英]['ʃɑ:pən]  [美]['ʃɑrpṇ]
修锐
1.
The truing and sharpening methods of CBN wheels are summarized.
综合评述了CBN砂轮的整形和修锐方法 ,分析了各种方法的特点和应用。
2.
Experiments of mechnical grinding sharpening and sand blasting sharpening were also conducted and their effect was compared.
同时,分析比较了机械修锐和喷砂修锐的效果。
4)  Laser repairing
激光修复
1.
With different laser processing technologies,such as laser alloying,laser repairing and laser solution strengthen,two kinds of steam turbine blades with 2Cr13 and 17-4PH were hardened and repaired.
选择不同的激光加工技术,如激光合金化、激光修复和激光固溶技术,实现了2Cr13和17-4PH两种常见叶片的强化与修复。
5)  Laser Trimming
激光修调
1.
A Method of Generating Precision Clock Signal Through Laser Trimming;
一种通过激光修调产生精确时钟的方法
6)  laser post-treatment
激光修饰
补充资料:朱锐
朱锐

    中国宋代画家。生卒年不详,活动于北宋末南宋初。河北人。原为北宋宣和画院待诏,南渡后又入绍兴画院,任待诏,授迪功郎,赐金带。擅山水,工雪景,师法王维,所画多骡纲、雪猎、盘车、行旅等题材,表现了车辆旅人跋涉于荒寒苍凉的溪山之间的艰辛之状。形象真实,主题鲜明,情景动人。有《盘车图》传世。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条