1) high temperature gas-cooled reactor
高温气冷堆
1.
SiC/SiO_2 oxidation-resistant coatings on fuel element matrix graphite of high temperature gas-cooled reactor;
高温气冷堆燃料元件基体石墨的SiC/SiO_2抗氧化涂层研究
2.
Research on simulator system with virtual technology method for high temperature gas-cooled reactor;
采用虚拟场景技术的高温气冷堆仿真系统研究
3.
Study on characteristic of helium turbine with high temperature gas-cooled reactor;
高温气冷堆氦气轮机性能的初步研究
2) high-temperature gas-cooled reactor
高温气冷堆
1.
Coagulating Evolution of Graphite Dust in Helium Flow of 10 MW High-Temperature Gas-Cooled Reactor;
10MW高温气冷堆氦气流中石墨粉尘的凝并发展
2.
Numerical Simulation of Flow Field in Hot Gas Chamber of High-Temperature Gas-Cooled Reactor;
高温气冷堆热气联箱内部流场数值模拟
3.
A lumped parameter model was proposed to research dynamic performances of plate-fin recuperator in high-temperature gas-cooled reactor with direct helium turbine cycle(HTGR-GT).
针对高温气冷堆直接氦气透平循环中的板翅式回热器,研究提出一仅考虑回热器芯部热容的集总参数模型,即无限大芯部热容的集总参数模型,并利用四阶龙格-库塔方法求解该模型,求解过程中考虑温度对气体物性的影响。
3) high temperature gas cooled reactor
高温气冷堆
1.
Coat mix material was developed during the course of R&D of nuclear graphite for high temperature gas cooled reactor.
包混材料是在研制高温气冷堆用炭 /石墨材料的过程发展出来的。
2.
The coated fuel particle is the key fuel element in the high temperature gas cooled reactor (HTGR).
包覆燃料颗粒是高温气冷堆燃料元件的关键组成部分。
3.
The essential principle and implementation of the bi directional detector for Fuel Handling System (FHS) in 10MW High Temperature gas cooled Reactor (HTR 10) are presented.
介绍了１０ＭＷ高温气冷堆燃料元件装卸系统双向探测器的基本原理和实现方法。
4) HTGR
高温气冷堆
1.
Design of the Fuel Balls Inspecting System for Pebble-bed HTGR;
球床式高温气冷堆过球检测系统设计
2.
Investigations on the Coupling of HTGR with Supercritical Steam Cycle;
高温气冷堆超临界蒸汽动力循环电站研究
3.
Xenon oscillations in the ring core of large HTGR;
大型环形高温气冷堆中的氙振荡
5) HTR
高温气冷堆
1.
Study of the Graphite used for the 10MW HTR;
10MW高温气冷堆堆用石墨的研究
2.
In order to assess the impact of radiation on environment and human from 10 MW High Temperature Gas-Cooled Reactor(HTR-10) at various power,some radiation monitoring items such as neutron dose rate on the top of reactor shell,γ absorbed dose rate of the technic plume and technic areas and noble gas plume released from reactor chimney were carried out.
通过对10 MW高温气冷堆从装料前到满功率运行期间工艺流、工艺间、流出物、厂区环境的放射性核素含量、个人剂量水平进行的系统监测,了解了反应堆在不同功率下运行时对环境和工作人员的辐射影响,为反应堆安全运行和验收评价提供依据。
3.
Most High Temperature Gas-Cooled Reactor (HTR ) systems are significantly under- moderated for economic reasons, so that accidental water or steam ingress.
由于经济上的原因，大多数高温气冷堆（ＨＴＲ）系统都是慢化不充分的。
6) HTR-10
10MW高温气冷堆
1.
Emergency Planning and Preparedness for HTR-10;
10MW高温气冷堆的应急计划与应急准备
2.
Study on Network Communication of the Simulation and Assistant System of HTR-10;
10MW高温气冷堆仿真支持系统网络通信研究
3.
In this paper, the features of the emergency power supply system of the 10MW High Temperature Gas-cooled Reactor (HTR-10) are briefly introduced, and the reliability of the emergency power supply system of the HTR-10 is calculated using fault-tree analysis method.
简单介绍了10MW高温气冷堆（HTR-10）电力系统的设计特点，并用故障树法对HTR－10交流安全母线供电的可靠性进行了定量的理论分析。
补充资料：高温气冷堆
分子式：
CAS号：
性质：用惰性气体作载热剂，其出口温度可高达95℃的反应堆。特点是工作温度高、热效率高(40％～41.6％)、转换比大，可达0.62。燃耗深，最大可达200 000MWd/t。高温气冷堆采用全陶瓷燃料元件，石墨作慢化剂，惰性气体氦作冷却剂。石墨和氦气都有良好的导热性能。氦在高温下具有较好的化学稳定性，不会引起堆内材料的腐蚀。这种反应堆固有安全性好。它可以作为一种热源用于热电联产、煤的气化和天然气的蒸汽重整等。它还可以有效地利用钍资源。
CAS号：
性质：用惰性气体作载热剂，其出口温度可高达95℃的反应堆。特点是工作温度高、热效率高(40％～41.6％)、转换比大，可达0.62。燃耗深，最大可达200 000MWd/t。高温气冷堆采用全陶瓷燃料元件，石墨作慢化剂，惰性气体氦作冷却剂。石墨和氦气都有良好的导热性能。氦在高温下具有较好的化学稳定性，不会引起堆内材料的腐蚀。这种反应堆固有安全性好。它可以作为一种热源用于热电联产、煤的气化和天然气的蒸汽重整等。它还可以有效地利用钍资源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条