1)  acrylic modified alkyd
丙烯酸改性醇酸
1.
A self-drying aqueous acrylic modified alkyd dispersion industry finish was prepared based on self-made aqueous acrylic modified alkyd dispersion with core-shell structure.
采用自制具有核-壳结构的自干型丙烯酸改性醇酸水分散体乳液,制得有一定装饰效果和防锈效果的水性工业面漆,并对影响面漆性能的多种因素进行了探讨。
2)  acrylate modified alkyd resin
丙烯酸改性醇酸树脂
1.
High-performance acrylate modified alkyd resin is prepared by esterification.
用酯化法制得高性能丙烯酸改性醇酸树脂,并用该树脂配制成施工方便,干燥迅速,抗回黏性、耐沾污性、耐候性及耐油性好的单组分汽车涂料。
3)  acrylated alkyd resin
丙烯酸改性醇酸树脂
4)  Propene
丙烯
1.
Nanostructured CoMoO_4 Supported on Mesoporous SBA-15 for Catalytic Oxidative Dehydrogenation of Propane to Propene;
SBA-15负载纳米CoMoO_4催化剂催化丙烷氧化脱氢制丙烯(英文)
2.
Establishment of Analysis Method on Sulfur Forms in Propene;
丙烯中形态硫分析方法的建立
3.
Deactivation of catalyst TS-1 in propene epoxidation;
丙烯环氧化反应中TS-1催化剂失活研究
5)  propylene
丙烯
1.
Study on Conversion of Butylenes to Propylene over SAPO-34 Molecular Sieve;
SAPO-34分子筛催化丁烯转化制丙烯的研究
2.
Application of assistant LTB-1 for enhancing yield of propylene in FCCU;
LTB-1型增产丙烯助剂在催化裂化装置上的应用
3.
Industrial application of catalyst LIP-200 for increasing yield of propylene;
增产丙烯LIP-200催化剂的工业应用
6)  propane
丙烯
1.
A divided wall column was used to separate propylene and propane.
提出了采用隔离壁塔分离丙烯-丙烷的新工艺。
2.
The effect of Cr addition to Pt-Sn/γ-Al_2O_3 catalyst on the activity,selectivity and deactivation in the propane dehydrogenation was studied.
结果表明,添加少量Cr可显著改善Pt-Sn/γ-A l2O3催化剂的脱氢稳定性,可提高丙烯选择性,降低催化剂表面积炭量。
3.
Due to the different catalytic oxidation property between propylene and propane,the impact of nature of hydrocarbon to light-off performance is investigated in laboratory simulated evaluation system.
在实验室模拟研究中 ,丙烷和丙烯在Pt—Rh型汽车尾气催化剂表面的催化氧化性能的差异 ,会对催化剂的起燃特性表现造成影响。
参考词条
补充资料：不干性油改性醇酸树脂
分子式：
CAS号：

性质：分子结构中含有蓖麻油、椰子油或玉米油等成分的醇酸树脂。自身不能固化成膜，不能单独作为涂料使用，须加入硝基漆以提高其附着力、柔韧性和耐候性等，或与氨基树脂等配合使用。由蓖麻油或椰子油或合成脂肪酸、苯二甲酸酐和丙三醇共缩聚制得。可与其他热固性树脂配合用作烘漆用树脂。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。