1) rack
[英][ræk] [美][ræk]
齿条
1.
A machining process for rack of straight push-rake linear reducer;
直动推杆式直线减速器齿条齿廓加工方法
2.
A QUALITY CONTROL METHOD FOR RACK IN NUMERICAL CONTROL CUTTING;
数控切割中齿条质量的控制方法
3.
The Numerical Control Lathe which can Process the Long Rack;
能加工特长齿条的数控车床
2) wires
[英]['waiə] [美][waɪr]
齿条
1.
Introductin is done to the chain-locked taker-in wires regarding the features and the comparison with the traditional ones.
介绍了新型链锁式刺辊齿条的特点以及与传统齿条的对比分析,通过应用试验说明新型链锁式刺辊齿条对成纱质量稳定提高的作用。
2.
Analysis is done to requirment of wires for the clothing for wool production.
分析了精纺梳毛机对针布齿条的要求,介绍了在开松、预梳区使用V形自锁基部针布的优点及其应用配置,说明新型锡林、道夫针布不仅对毛纤维的损伤少,而且除杂效果好,落毛少、制成率提高。
3.
Description is done to the characteristics,specifications and process parameters of wires.
阐述了非织造布梳理机用齿条的性能要求、规格和工艺参数 ,并探讨了齿条对非织造布梳理质量的影响因素和选配的要
3) gear rack
齿条
1.
This paper introduces the method of simple conversion measuring and calculation for gear rack thickness with depthometer as prime measuring tool and Measuring Pin,measuring ball as auxiliary tool.
介绍了以深度尺为量具,以棒、球为辅件的齿条齿厚简易转化测量与计算方法。
2.
The mechanism is made up of gear and gear rack can get rid of dead point.
提出了一种齿轮齿条机构产生匀速往复直线运动并能克服死点的方法。
3.
For the shape characteristics of 120°42CrMo gear racks,the forging process for shaping by the bending proceduce at last has been prepared.
针对120°42CrMo齿条的形状特点制定了最后用弯曲工序成形的锻造工艺。
4) wire
[英]['waɪə(r)] [美]['waɪr]
齿条
1.
The manufacturing status of China clothing wire is outlined plus some caution involved.
综述了国内针布齿条制造业现状,从加热温度、保温时间和淬火冷却速度等方面,探讨了淬火工艺选择的影响因素,重点分析了针布齿条的火焰加热淬火工艺的诸多注意事项及质量缺陷与成因,并提出采用在线高频预热技术、安全环保高热能燃料等几点可行性建议。
2.
Through the comparative analysis of the card wire both at home and abroad,the main cause of the wire failure is found.
通过对进口与国产分梳辊齿条的使用对比,分析了分梳辊齿条失效的主要原因,并提出了相应的对策与改进建议,对提高国产分梳辊齿条的制造质量、使用寿命及实现进口分梳辊齿条国产化有重要的意义。
3.
Sampling the products from less than 20 manufacturers both at home and abroad,categorizing and comparative analysis is done to the wire of the clothing and the development trend is given to the clothing on the cylinder,doff,rotating flat,stationary flat,sectional carding plate.
根据国内外近20个针布公司的产品信息,对梳棉机用针布齿条进行了分类汇总、分析对比,指出梳棉机锡林、道夫、回转盖板、固定盖板、分梳板用针布的发展趋势。
5) Gear and Rack
齿轮齿条
1.
The design of self-lock mechanism in gear and rack;
一种齿轮齿条自锁机构的设计
2.
Through analyzing the structue of plastics with inner screw,determined mold structure with gear and rack stripping screw mechanism.
通过对有内螺纹的塑件结构分析,确定采用齿轮齿条机构脱模的模具结构。
6) rack profile
齿条齿廓
1.
According to kinematics analysis of revolving-stock swing link rack drive, the paper derives the equation of rack profile and the condition of non-undercut in the light of the natures of normal tolerant, which provides a theoretical basis for further research.
通过对回转激波摆杆齿条传动机构的运动分析,利用法向等距线的性质,推导了该机构的齿条齿廓 方程,得到了齿条齿廓不发生顶切的条件,为该机构的进一步研究提供了理论基础。
补充资料：油缸齿条抽弯头
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条