1) pyrolytic oil
热解油
1.
Research on sulfur and nitrogen removal characteristics of scrap-tire pyrolytic oil by hydrofining;
废轮胎热解油加氢精制硫氮脱除特性研究
2.
2%;②compared to other biomasses,co-pyrolysis of corn cob with waste tire is more propitious to increase the heat value of pyrolytic oil;③the law of viscosity and density of co-pyrolytic oil is close to si.
生物质与废轮胎以不同比例组成的均匀混合物在管式固定床内共热解,考察了特性及组成差异较大的3种生物质稻壳、木屑、玉米芯对产生的共热解油性质的影响。
2) pyrolysis oil
热解油
1.
Biomarker and its implication of pyrolysis oils of macerals from Jurassic coal measures,Northwest China;
中国西北侏罗纪煤系显微组分热解油生物标志物特征及其意义
2.
A series of geochemical analyses of the pyrolysis oils produced by the macerals are carried out.
从吐哈盆地侏罗纪煤中分离富集了藻类体、孢子体、角质体、镜质体、基质镜质体和丝质体6种主要显微组分,进行了热解及热模拟实验,并对各显微组分热模拟生成的产物热解油进行了碳同位素组成等分析。
3.
The resin in waste printed circuit boards was first converted into pyrolysis oil rich in phenol in the presence of CaCO3.
在碳酸钙存在下,采用热解技术将废旧电路板中的树脂转化为富含酚的热解油,然后直接加入甲醛溶液反应制备热解油型酚醛树脂,实现了废旧电路板中树脂的再生,酚醛树脂的性能结构类似于氨催化的酚醛树脂。
3) pyrolytic tar
热解油
1.
Major ingredients of pyrolytic tar of larch bark were studied by advanced analysis methods such as FTIR, DTA and GC-MS.
利用红外光谱、差热扫描以及气相色谱—质谱联用等先进的分析手段对落叶松树皮快速热解油的主要成分进行了分析。
2.
Using pyrolytic tar from larch bark as partial substitute for phenol in proportions of 0%, 20%, 40%, 60% , four types of PF resins were prepared and applied in hot-pressing three- layer poplar plywood by orthogonal test methods with different levels of press pressure, press time, and and resin content.
以落叶松树皮热解油按比例0%、20%、40%、60%代替苯酚制备的4种酚醛树脂胶黏剂和人工林杨木单板为原料,采用正交实验设计方法,选择不同的热压压力、热压时间和涂胶量进行了3层胶合板压制试验。
3.
The pyrolytic tar,gas and solid were obtained by pyrolysising of waste printed circuit boards mixed with CaCO3.
废旧电路板中的树脂与碳酸钙共同加热,获得气体、固体和热解油3种热解产物。
4) bio-oil
热解油
1.
Study on hydrogen production from steam reforming methanol as a bio-oil model compound;
热解油模型化合物甲醇的蒸汽转化制氢研究
2.
The bio-oil was composed of acetic acid, hydroxyacetaldehy, acetol, levoglucosan, furaldehyde, and a small quantity of phenols.
结果表明,热解温度为460~520℃时热解油产率最大,主要有醋酸、羟基乙醛、羟基丙酮、左旋葡聚糖、糠醛,油热值为17。
3.
This paper reviews that the factor influencing on the content,constitute and acidity of bio-oil is metal salt content of minerals.
通过对一年生和多年生的生物质及其热解油组成的分析,探讨了影响生物质热解油组成及其酸度的重要因素是生物质中的金属盐矿物质,金属盐舍量增加,致使热解油收率降低、酸含量增加。
6) pyrolytic tar
热解焦油
1.
It was found that there are three factors-material properties, final pyrolysis temerature (FPT) and heat method, affect the pyrolytic tar productivity of hazardous solid waste at a high level.
通过对几种有害固体废物(废橡胶,废电路板,医疗废物,废油漆,污泥)的热解实验,考察了不同工况下有害固体废弃物热解焦油的特性。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条