1) Waste Oil
污油
1.
Degeneration performance of oil gator for the waste oil;
OIL GATOR对污油的降解性能
2) dirty oil
污油
1.
Applying ultrasound to demulsification of dirty oil for water removal;
超声波污油破乳脱水的研究
2.
Based on the investigation of heavy dirty oil in SINOPEC Zhenhai Refining & Chemical Company,on-the-spot research in the standing wave field on several important parameters which affect dewatering and demulsification of the dirty oil,such as sound intensity,radiating time,sedimentation time,sedimentation temperature and demulsifier dosage,was carried out.
以镇海炼化重污油为研究对象,采用正交实验考察了驻波场中影响超声污油破乳脱水的几个重要参数,如超声波声强、辐照时间、沉降时间、沉降温度、破乳剂类型及用量等。
3) slop
[英][slɔp] [美][slɑp]
污油
1.
Synergistic treatment of iron sulfide laden and stabilized slops simultaneously by use of surfactant and denitrifying bacteria was studied.
对表面活性剂和反硝化细菌协同处理含硫化亚铁颗粒污油的可行性进行了研究。
2.
Feasibility of synergistic treatment of iron sulfide laden and stabilized slops simultaneously by use of surfactant and sulfide scavenger was studied.
对表面活性剂和硫化物去除剂协同处理含硫化亚铁颗粒污油的可行性进行了研究。
4) oil pollution
油污
1.
Compensation for mid-term or long-term damage of oil pollution from ships;
船舶油污中长期损失赔偿
2.
Adverse effects of oil pollution on water quality of heating systems;
施工油污对供暖系统水质的影响与危害
3.
Structure of a fund for compensation for oil pollution damage in PRC;
中国油污基金制度的构建模式
5) oil stain
油污
1.
But the oil stain on the surface of electron aluminum foil will directly affect the corrosion of foils.
电子铝箔腐蚀后希望得到高的比表面积 ,而油污由于覆盖在电子铝箔表面 ,会对光箔的腐蚀产生直接的影 响。
2.
Through investigation of reasons that oil stain cloth defects are formed on gripper loom,measures of controlling such emerged defects are proposed from the aspects of management,devices and operation.
通过分析片梭织机产生布面油污疵点的原因,从管理、设备、操作三个方面采取相应措施,减少布面的油污疵点,提高产品质量。
6) oilfield sump oil
油田污油
1.
Research and application of treatment technology of oilfield sump oil;
油田污油处理技术研究与应用
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条