1) well completing testing
完井测试
2) completion
完井
1.
A discussion on completion of thermal production wells with φ139.7mm casing in heavy oil reservoirs of Henan oil-Held;
河南稠油热采井Φ139.7mm套管完井探讨
2.
Tertiary infilling well completion effect evaluation in Daqing oilfield;
大庆油田三次加密井完井效果评价
3.
Drilling & completion techniques for coalbed methane wells in Jincheng Area,Shanxi,China;
山西晋城地区煤层气钻井完井技术
3) well completion
完井
1.
The low pressure and low permeable reservoir fast well completion appraisal and produce forecast technical research and the application in DaGang oil field development well testing design application;
低压低渗油藏快速完井评价与产能预测技术的研究及在大港开发井试油设计中的应用
2.
Application of well completion casing sand gluing technology in Liaohe Oilfield;
完井套管粘砂工艺技术在辽河油田的应用
3.
Well Completion Technology of Sand Control by Means of Expandable Screen;
可膨胀筛管防砂完井技术
4) perforated completion
射孔完井
1.
Through core analysis and sensitivity experiments,this paper illustrates the potential damage factors and the damage degree of the reservoir in the course of perforated completion.
室内实验研究可知,射孔完井过程中油层的伤害主要是射孔压实带和射孔液的伤害。
2.
D finite element model for thermal fluids of perforated completion and open hole completion is developed by using thermal fluid field for simulating percolation field in perforated completion.
用热流场模拟射孔完井渗流场,建立了射孔完井热流和裸眼完井热流有限元三维模型。
3.
This paper depicts the reasons why oil wells produce differently and the factors that affect the productivity of neighboring wells through comparisons of different perforated completion means in the developing wells at the QS offshore oilfield.
通过对QS油田开发井集中射孔完井时使用不同方法结果的对比分析,探讨使用不同的射孔完井工艺使油井产量差异大的原因,找出影响油井生产能力的主要因素,提出在海上的非疏松砂岩地层、低孔隙度低渗透率砂岩油藏使用复合射孔的建议。
5) completion technique
完井工艺
1.
The three series of completion techniques(conventional perforation,TCP and new completion) are formed including fourteen technologies,which are adaptable to different geologic settings and hole conditions.
综述了大庆油田目前完井工艺技术现状。
6) Completion fluids
完井液
1.
So,they are very good drilling and completion fluids system.
现在由于生产厂家大增 ,且甲酸盐钻井液回收处理再利用获得成功 ,尤其是在许多试验井成功使用 ,使这一钻井、完井液体系受到普遍重视。
2.
The formula, properties and applications of cyclable foam drilling & completion fluids in underbalanced drilling in Luo 151 11 Well are introduced.
介绍了可循环泡沫钻井完井液的配方、性能及在罗 1 5 1 - 1 1井欠平衡压力钻井中的应用情况。
参考词条
补充资料：完井
| 完井 well completion 钻井工程的最后环节。在石油开采中，油、气井完井包括钻开油层，完井方法的选择和固井、射孔作业等。对低渗透率的生产层或受到泥浆严重污染时，还需进行酸化处理、水力压裂等增产措施，才能算完井。根据生产层的地质特点，采用不同的完井方法：①射孔完井法。即钻穿油、气层，下入油层套管，固井后对生产层射孔，此法采用最为广泛。②裸眼完井法。即套管下至生产层顶部进行固井，生产层段裸露的完井方法。此法多用于碳酸盐岩、硬砂岩和胶结比较好、层位比较简单的油层。优点是生产层裸露面积大，油、气流入井内的阻力小，但不适于有不同性质、不同压力的多油层。根据钻开生产层和下入套管的时间先后，裸眼完井法又分为先期裸眼完井法和后期裸眼完井法。③衬管完井法。即把油层套管下至生产层顶部进行固井，然后钻开生产层，下入带孔眼的衬管进行生产，此种完井法具有防砂作用。④砾石充填完井法。在衬管和井壁之间充填一定尺寸和数量的砾石。 固井作业是钻井达到预定深度后，下入套管并注入水泥浆，封固套管和井壁之间的环形空间的作业。固井的主要目的是封隔疏松的易塌、易漏地层；封隔油、气、水层，防止互相窜漏。固井作业的主要设备有水泥车、下灰罐车、混合漏斗和其他附属设备等。射孔作业是采用专门的射孔器射穿套管和水泥环并进入地层一定深度，在井眼和油层间造成通道，使油、气能从地层流入井内。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。