1) two-stage oxidizing process
二次氧化工艺
2) two-times vulcanization process
二次硫化工艺
3) oxidation process
氧化工艺
1.
Development trend of PX oxidation process;
PX氧化工艺的发展方向
2.
Following the introduction of two methods for NH3/air ratio control in nitric acid production with oxidation process,by flow and by ratio,the author compared the differences between the methods in parameter indication,control method and system performance,which turned out the method with ratio control was more suitable.
对稀硝装置氧化工艺氨-空比值控制系统的2种控制方案——流量控制方案和比值控制方案分别作了介绍。
4) oxidation processing
氧化工艺
1.
This paper indicates that applying the professional knowledge to real research programs is propitious to improve students comprehensive qualities during undergraduate thesis working through studying the influence of oxidation processing on microstructure and properties of TiN films deposited by vacuum.
文章通过氧化工艺对真空电弧沉积TiN薄膜组织与性能的影响这一课题研究 ,指出在毕业论文的工作中 ,将专业知识运用到实际课题的研究中 ,有利于提高学生的综合素
2.
The influence of oxidation processing on microstructure and properties of TiN films deposited by vacuum arc was studied .
研究了各种氧化工艺对真空电弧沉积 Ti N薄膜组织与性能的影响。
5) reoxidation
二次氧化
1.
The reoxidation of molten steel has been studied.
通过对钢水二次氧化的分析，揭示了钢包渣对钢水二次氧化的主要作用钢包渣还原处理技术的开发及应用，为降低钢水氧含量、降低板坯夹杂物进而提高产品质量起到了重要作用，同时促进了钢水进一步脱
2.
The influences of the deoxidizer, reoxidation, unsteady casting and other factors were studied and the main influential factors were found.
通过对杭钢转炉厂Q215钢生产过程各工艺环节系统取样,采用金相显微镜、大样电解和常规化学分析等方法对Q215钢洁净度进行了系统研究,分析了非稳态浇注、二次氧化、脱氧剂等对洁净度的影响,找出了现有生产工艺中影响Q215钢洁净度的主要因素,并提出了相应的工艺改进措施。
3.
When the molten steel was transferred into tundish,there was reoxidation of molten steel and melting of oxides in refractory material.
3%,而[N]含量变化并不明显;钢液转移至中间包过程中存在较严重的钢液二次氧化和中间包内衬氧化物的熔蚀,T[O]和[N]含量分别增加了73。
6) two stage bio-contact oxidation process
二段生物接触氧化工艺
1.
The experimental study on two stage bio-contact oxidation process with PP reticulation filling and enforced slag combination filling for treatment of domestic sewage was carried out.
以规模小区生活污水为水源,对采用聚丙烯网状填料和强化炉渣组合填料的二段生物接触氧化工艺(以下简称二段法)进行了试验研究,试验针对本工艺的各项技术指标、影响因素以及各相关参数进行了较系统的试验测试。
补充资料：二次硫化工艺
分子式：
CAS号：
性质：胶鞋生产中，先将鞋底硫化成型，尔后再与鞋帮及其他部件结合，最后再放入硫化罐中加热加压硫化。用这种方式进行鞋的生产称作二次硫化工艺。该工艺制得的鞋底花纹清晰，轮廓分明，是当今胶鞋生产的发展方向。
CAS号：
性质：胶鞋生产中，先将鞋底硫化成型，尔后再与鞋帮及其他部件结合，最后再放入硫化罐中加热加压硫化。用这种方式进行鞋的生产称作二次硫化工艺。该工艺制得的鞋底花纹清晰，轮廓分明，是当今胶鞋生产的发展方向。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条