1) template method
模板法
1.
Assembly of polyamide 66/Pt coaxial nanocables by template method;
模板法组装尼龙-66/铂同轴纳米电缆的研究
2.
Mesoporous carbon as supercapacitor material prepared by template method;
模板法制备超级电容器中孔炭电极材料
3.
Fabrication of Nano-porous SiC-based Ceramics Using Template Method;
模板法制备SiC基陶瓷纳米孔结构材料
2) template
[英]['templeɪt] [美]['tɛm'plet]
模板法
1.
The Research and Implement of Hybrid Meshing Algorithm Based on Template and Quadtree;
基于模板法和四叉树法的混合网格划分算法的研究与实现
2.
Synthesis of nano-hydroxyapatite by using polyethylene glycol as a template
聚乙二醇模板法制备纳米羟基磷灰石
3.
For preparing and assembling ordered nanostructures,the method to use substances with special structures as templates is a favorable approach,which could control the constitute,structure,morphology,size,configuration and arrangement of the nanomaterials.
利用模板法,可以制备金属、合金、氧化物、半导体和聚合物及其复合组份等多种纳米结构有序体系。
3) templating method
模板法
1.
Templating method, including rigid and soft templating method, which can be used to fabricate nanostructures with various shapes of many species(such as spherical particles, 1-D nanorod, nanowire, nanotube and 2-D ordered nanostructures, etc.
模板法(包括硬模板和软模板法)是制备纳米结构材料的常用方法,可用来制备多种物质的各种形状(如:球形粒子、一维纳米棒、纳米线、纳米管以及二维有序阵列等)的纳米结构,近年来关于这一领域的研究较为活跃。
2.
The preparation methods of the ferrite hollow microspheres,such as spray drying method, templating method, layer- by- layer assembly, and the investigation status are reviewed.
综述了国内外铁氧体空心微球的各种制备方法,如:喷雾热结法、模板法、逐层组装法等,及其优缺点和研究现状。
3.
Ordered carbon nanotubes arrays (OCNT) were synthesized by templating method.
用模板法合成纳米碳管阵列(ordered carbon nanotubes arrays,OCNT)。
4) template synthesis
模板法
1.
Two types of template-induced assembly strategies for fabrication of hierarchically ordered zeolites were introduced,namely soft template synthesis method and hard template synthesis method.
介绍了制备多级有序沸石材料的两种重要方法:软模板法和硬模板法;并就制备方法和产品结构的特点进行了评述。
5) Template methods
模板法
1.
Compared with other SiC forming processes,template methods has two fundamental advantages:(1)the ability to produce complex and near-net shapes,and(2)the ability to sinter at low temperatures and for short times.
在现有制备工艺中模板法是一种有效的复杂形状SiC陶瓷的成型技术,其能力源于硅化前多孔碳质模板的易成型以及硅化前后模板的几何形状保持不变。
6) soft template method
软模板法
1.
Synthesis and characterization of polyaniline microtubes by soft template method
软模板法聚苯胺微米管的制备与表征
2.
Mesoporous TiO2 materials were obtained by soft template method through old and calcination.
以三嵌段共聚物EO20PO70EO20(P123)为模板剂,异丙醇钛(简称TTIP)为无机钛源,在适量强酸的催化作用下,由软模板法合成出TiO2介孔材料的前驱体凝胶后,经老化、煅烧得到了TiO2介孔材料。
3.
High-surface-area La2O2CO3 nanowires were synthesized using hexadecyltrimethyl ammonium bromide (CTAB) as a soft template method.
采用以十六烷基三甲基溴化铵(CTAB)为模板剂的软模板法合成了高比表面积的La2O2CO3纳米线,考察了溶剂、分散剂及晶化温度等因素对其制备的影响,并应用X射线衍射(XRD)、BET和SEM等技术对所得材料进行了表征。
补充资料：法性属法为法性土
【法性属法为法性土】
谓真如法性之理，譬如虚空，遍一切处，乃是法身所证之体，即为所依之土，故名法性属法，为法性土。
谓真如法性之理，譬如虚空，遍一切处，乃是法身所证之体，即为所依之土，故名法性属法，为法性土。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条