1) dynamic mechanical property
动态力学性能
1.
Research on the dynamic mechanical property and failure mechanism of glass fiber reinforced aerogel
玻璃纤维增强气凝胶的动态力学性能及其破坏机理
2.
The effect of the content of PS and sulfur on the storage stability of asphalt at high temperature,viscosity-temperature behavior,and dynamic mechanical property was studied.
通过反应共混技术制备了聚苯乙烯(PS)/苯乙烯-丁二烯-苯乙烯共聚物(SBS)改性沥青,研究了 PS 用量、反应剂硫磺(sulfur)对沥青高温贮存稳定性、黏度-温度特性和动态力学性能的影响。
3.
The effects of liquid polyisoprene(LIR) and aromatic oil on the microstructure,flex fatigue,compression fatigue and dynamic mechanical property of natural rubber/polybutadiene rubber were comparatively investigated.
研究了液体聚异戊二烯(LIR)作为增塑剂对天然橡胶(NR)/聚丁二烯橡胶(BR)硫化胶微观结构、弯曲疲劳性能、压缩疲劳性能和动态力学性能的影响,并与加入工业用增塑剂芳烃油的硫化胶进行了对比。
2) dynamic mechanical properties
动态力学性能
1.
Dynamic Mechanical Properties of LDPE/SBR Blend Modified Asphalt;
LDPE/SBR复合改性沥青动态力学性能的研究
2.
Microstructure and dynamic mechanical properties of hindered phenol AO-80/NBR/PVC crosslinking composites;
受阻酚AO-80/NBR/PVC交联复合材料的结构与动态力学性能
3.
Relations between morphology and dynamic mechanical properties of SiO_2/EPDM composites;
SiO_2/EPDM复合材料微观形态与动态力学性能的关系
3) dynamic property
动态力学性能
1.
The morphology,dynamic property,curing property and mechanical properties of the blends were discussed in details.
制备了超细全硫化粉末丁苯橡胶(UFPSBR)/三元乙丙橡胶(EPDM)共混物,研究了其硫化特性、相态结构、动态力学性能及物理机械性能。
2.
The effects of chemical compatibility on dynamic property and colloidal particles morphology of LIPN P(S-BA)/P(BA-S) have been studied by changing the relative amount of two components.
通过改变两组份的相对组成考察了化学相容性对LIPN P(S-BA)/P(BA-S)动态力学性能及乳胶粒的形态结构的影响。
3.
The results showed that,by adding coupling agent Si69 in the reaction which produced silica,the boundary interaction between silica and NR matrix was increased,the dispersion of silica in NR matrix was improved,and the physical properties of composites and dynamic property of compound were improved;the optimum addition level of coupling agent Si69 was 3 phr.
结果表明,在乳液共沉法生成白炭黑的反应中加入偶联剂Si69,可以增强白炭黑粒子与NR基体之间的界面作用,改善白炭黑在NR中的分散状态,提高复合材料的物理性能和混炼胶的动态力学性能;偶联剂Si69的适宜用量为3份。
4) dynamic properties
动态力学性能
1.
The curing characteristics,microstructure,dynamic properties and thermal stability of the obtained nanocomposites were investigated.
采用乳液共沉法和直接混炼法制备NBR/PVC/有机蒙脱土(OMMT)纳米复合材料,研究纳米复合材料的硫化特性、微观结构、动态力学性能和热稳定性。
2.
The microstructure,molecular weight,molecular weight distribution,glass transition temperature and dynamic properties of synthesized SIBR were characterized by IR,GPC,DSC,DMA.
采用IR、GPC、DSC、DMA等仪器对合成的SIBR的微观结构、分子量大小及分布、玻璃化转变温度和动态力学性能进行了分析测试。
3.
The dynamic properties of CB-filled tread compound were investigated.
对炭黑填充轮胎胎面胶的动态力学性能进行研究。
5) dynamic mechanical behavior
动态力学性能
1.
This article studies the dynamic mechanical behavior of water-solubilized damping coating with interpenetrating polymer networks of core-shell type of thermoset polyacrylic by the dynamic viscoelastic spectrum.
采用动态粘弹谱 (DMA)研究热固性丙烯酸酯类核 -壳结构互穿网络水性阻尼涂料的动态力学性能 。
2.
23 material test de vi ce and Split Hopkinson pressure bar equipment on specimens made by infiltration method under different strain rate are conducted to study the dynamic mechanical behavior of porous aluminum alloy respectively.
采用MTS810 2 3型万能材料试验机和分离式Hopkinson压杆 (SHPB)设备对加压渗流法制备的通孔泡沫铝合金进行了不同应变率下的准静态和动态压缩试验 ,以研究通孔泡沫铝的动态力学性能。
3.
Effects of different mass fraction of SF on mechanical properties,dynamic mechanical behavior and wear resistance of SF/PF composites were investigated.
将不同含量碱处理的剑麻纤维(SF)与酚醛树脂(PF)粉末、填料等在塑炼机上熔融混炼,通过模压成型工艺制备SF/PF复合材料,研究了SF含量对SF/PF复合材料力学性能、动态力学性能、摩擦磨损性能的影响,并借助SEM观察SF/PF复合材料磨损面的微观形貌。
6) dynamic and static mechanical properties
动、静态力学性能
1.
Compared with 60Si2MnA steel,the new steel 35SiCrVB has good advantages in both dynamic and static mechanical properties,which shows that the new spring .
经与 6 0Si2MnA钢比较 ,35Si2CrVB钢的动、静态力学性能均较 6 0Si2MnA为佳。
补充资料：动态力学性能
分子式：
CAS号：
性质：在周期性应力或应变作用下材料所表现出的各种性质。它是在动态下测定材料各种性能如动态模量、动态黏弹性、疲劳性和生热性等的总称。对各种橡胶制品而言，如轮胎、传动带、防振垫等都是在动态条件下使用的，只有了解材料的动态力学性能，才能设计出好的橡胶制品。
CAS号：
性质：在周期性应力或应变作用下材料所表现出的各种性质。它是在动态下测定材料各种性能如动态模量、动态黏弹性、疲劳性和生热性等的总称。对各种橡胶制品而言，如轮胎、传动带、防振垫等都是在动态条件下使用的，只有了解材料的动态力学性能，才能设计出好的橡胶制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条