说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 吸波性能
1)  absorbing property
吸波性能
1.
The impact of magnetizing treatment on the absorbing property of the absorbing coat;
磁化处理对吸波涂层吸波性能的影响
2.
The influence of the fiber absorber's conductivity,the fiber content and the thickness of foam screed on the foam material's absorbing property was discussed by studying the absorbing property of the polyurethane foam filling with a kind of conductive short fibers.
通过对一种含导电短纤维的聚氨酯(PUR)泡沫塑料吸波性能的研究,探讨了纤维吸收剂的电导率、含量和泡沫塑料试样厚度对PUR泡沫塑料吸波性能的影响。
3.
By analysing the absorbing properties of polyurethane foam plastic filling with carbon fiber, carbon fiber/fiberⅠ, carbon fiber/ fiber Ⅱ, the influence of fiber type, content and screed thickness on absorbing property of the plastic sample plate were discussed.
通过对碳纤维、碳纤维/纤维Ⅰ和碳纤维/纤维Ⅱ分别填充的硬质聚氨酯泡沫塑料的吸波性能的研究,探讨了纤维类型、纤维含量、样品厚度的相关变化对塑料样板吸波性能的影响。
2)  absorbing properties
吸波性能
1.
Study of magnetic and conductive polyaniline on microwave electromegnetic parameters and absorbing properties;
兼具铁磁性的导电聚苯胺复合物电磁参数及吸波性能的研究
2.
Electromagnetic parameters of different volume of SiCf and PIF orientated RAM are measured by the free-space reflection method and effects of fiber volume on the electromagnetic parameters are analyzed,as well as absorbing properties are calculated with the measured electromagnetic parameters by theory,and the results of computation are verified by the experiments.
采用自由空间反射法,分别对不同体积分数的碳化硅纤维和铁纤维吸波贴片的电磁参数进行了测试,对纤维的体积分数对电磁参数的影响规律进行了分析,同时,根据测试的电磁参数和各向异性反射理论对纤维的体积分数对吸波性能的影响进行了理论计算和实验验证。
3.
The absorbing properties of FSS absorbers were investigated with finite element method and the results showed that the sheet resistance of FSS unit cell,the parameter p,parameter a and the thickness of dielectric layer were all able to affect the absorbing properties.
采用有限元软件对吸波性能进行研究。
3)  microwave absorption properties
吸波性能
1.
Experiments are carried out to measure the microwave absorption properties of W-type hexagonal barium ferritet,and two stronge absorbing peak.
对其吸波性能进行了测量,发现有2个强吸收峰:0。
2.
Barium ferrite has excellent microwave absorption properties.
钡铁氧体有着良好的吸波性能,本文介绍了离子掺杂钡铁氧体的制备方法及其研究进展,特别是Ti4+/M2+离子掺杂、Sn4+/M2+离子掺杂、Co3+/Co2+离子掺杂、稀土掺杂钡铁氧体的研究现状,论述了离子掺杂钡铁氧体的几种典型的表征方法,并介绍了离子掺杂钡铁氧体的应用情况。
3.
The influence of dosage of absorbing reagents and thickness of coatings on microwave absorption properties were studied.
以具有强磁损耗特性的磁粉、电阻型和电介质型物质作为吸波剂,制备出了具有阻抗渐变结构的3层复合雷达吸波涂层,研究了吸波剂用量和涂层厚度对吸波性能的影响。
4)  microwave absorbing property
吸波性能
1.
Microwave permittivity of carbon microcoils(CMCs) and microwave absorbing property of CMCs/Epoxy composite;
微螺旋炭纤维的微波电磁参数及其环氧复合材料的吸波性能研究
2.
The microwave absorbing property of coating that was made up of Mn-Zn ferrite nanocrystalline was characterized.
结果发现:与非纳米(微米级)吸波剂相比,纳米Mn-Zn铁氧体吸波剂的吸波性能显著高于前者。
3.
The experiment results showed that the composites materials with core/shell structure exhibits excellent microwave absorbing property.
5~20GHz频段内测试了材料的吸波性能
5)  absorption properties
吸波性能
1.
Preparation and microwave absorption properties of(LiFe)_xZn_(1-2x)Fe_2O_4;
(LiFe)_xZn_(1-2x)Fe_2O_4铁氧体的吸波性能研究
2.
Study on absorption properties of carbon nanotube/mulberry fiber composites;
碳纳米管/桑皮纤维复合材料吸波性能研究
3.
Microwave absorption properties of copper coated composites;
铜镀层复合材料的吸波性能
6)  wave-absorbing properties
吸波性能
1.
Study on wave-absorbing properties of cement mortar with wave-shaped steel fiber
波浪型钢纤维水泥砂浆吸波性能的研究
2.
The sample\'s components, microstructures, morphologies and wave-absorbing properties are analyzed and characterized by X-ray
采用X射线衍射仪、X射线能量色散谱仪、扫描电子显微镜、透射电子显微镜、微波网络矢量分析仪等手段对样品的成分、微观结构、形态、吸波性能等进行了分析表征,得出了菊花状ZnO纳米线簇的吸波性能与其形态密切相关的规律,并给出了菊花状ZnO纳米线簇的成核机理与生长机制。
3.
In order to research the wave-absorbing properties of fly ash in building materials,Type Ⅲ fly ash was added in mortar at the thickness of 10~30 mm.
为了研究粉煤灰在建筑材料中的吸波性能,将Ⅲ级粉煤灰掺入水泥砂浆中,制成了厚度为10~30 mm,长宽为180 mm×180 mm的试样,在水中养护8个月后进行吸波性能的测试。
补充资料:呿吸
1.张口吮食。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条