1) compatibilization
增容
1.
In-situ Compatibilization of PP/PS Blend by Friedel-Crafts Alkylation;
Friedel-Crafts烷基化反应就地增容PP/PS合金
2.
Study of Compatibilization of Amine Functionalized PP on Nano-silica/PP Composites;
氨化聚丙烯增容纳米二氧化硅/聚丙烯复合材料的研究
3.
Study of Compatibilization of PP/GF by PP-g-Si;
PP-g-Si对PP/GF的增容效果研究
2) compatibility
[英][kəm,pætə'bɪləti] [美][kəm'pætə'bɪlətɪ]
增容
1.
The poor compatibility of the blends prepared by pure PBT and ABS has been found.
以苯乙烯-马来酸酐共聚物(SMA)为增容剂,研究了共混工艺对ABS/PBT共混物聚集态结构和力学性能的影响。
2.
The result indicated that the mechanical properties and the compatibility of HDPE/PUR-T was improved effect.
以高密度聚乙烯(HDPE)和热塑性聚氨酯弹性体(PUR-T)为主要原料,以马来酸酐接枝(乙烯/乙酸乙烯酯)共聚物(E/VAC-g-MAH)为增容剂,采用双螺杆挤出熔融共混技术制备了HDPE/PUR-T和HDPE/PUR-T/(E/VAC-g-MAH)等共混材料,利用60Co-γ射线源在较低辐照剂量(小于等于25 kGy)下对共混材料进行了γ-辐照。
3.
The results showed that the couple agent KH570 was suitable for compatibility, and the peroxide DCP was suitable for vulcanizing.
对增容剂、共混工艺、共混比例等对共混胶的力学性能的影响进行了探讨。
3) compatibilizing
增容
1.
Thereinto,compatibilizing effect of MA-PP is the best.
研究了4种不同增容剂对HDPE基木塑复合材料力学性能的改善效果。
2.
The blending purpose and the advance of compatibilizing methods of the starch/polycaprolactone(PCL) system were introduced.
介绍了淀粉 /PCL的共混目的及该体系在增容方法方面的研究进
3.
The results show that POE and PA6 is an uncompatible system, but the POE g MAH has an obvious in situ compatibilizing and toughening effect on PA6.
采用熔融挤出法制备了ＰＡ６／ＰＯＥ和ＰＡ６／ＰＯＥｇＭＡＨ共混合金，借助于力学试验机、ＴＥＭ、ＳＥＭ、Ｍｏｌａｕ实验和毛细管流变仪测定了共混合金的力学性能、亚微相态、冲击断口形貌和流变性能，系统地研究了ＰＯＥｇＭＡＨ对ＰＡ６的增容增韧作用。
4) capacity increasing
增容
1.
This article emphatically discusses the capacity increasing process based on the former fundament for Fushun ethylene chemical Co.
锅炉给水泵是乙烯装置的重点设备之一,随着市场的不断发展,各乙烯厂都在增容改造,原有的设备能力已不能满足生产需求。
2.
33 dtex hollow fiber capacity increasing was feasible and capacity was imp roved and quality remained same.
33dtex中空纤维增容生产,对其纺丝、拉伸工艺进行研究。
5) capacity expansion
增容
1.
Discussion of capacity expansion of 150 t/d PET staple fiber plant;
150 t／d涤纶短纤维装置增容改造探讨
2.
The production process of esterification system in polyester plant changed greatly after capacity expansion rectification, and the difficulty in control increased.
聚酯装置酯化系统增容改造后,生产工艺变化很大,控制难度增加。
3.
The article briefly describes the overall conditions after the capacity expansion and modification of 4111- K2T.
针对４１１１－Ｋ２Ｔ汽轮机汽耗率高的问题，从汽轮机主机、凝汽器和调节阀系统着手，进行增容改造。
6) Expand to permit to increase to permit
扩容增容
补充资料：惨容
1.谓容色凄惨。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条