FPGA,FPGA,在线英语词典,英文翻译,专业英语

1) FPGA

FPGA

The design of well logging depth signal simulator based on FPGA device;

基于FPGA的测井深度信号模拟器设计

Research on and Application of DSP & FPGA Data Processing System;

DSP+FPGA数据处理系统的研究与应用

Design of FPGA in Motion Control System;

FPGA在运动控制系统中的设计

2) FPGA

现场可编程门阵列

Stepping Motor Control System Based on FPGA;

基于现场可编程门阵列的步进电机控制系统

Design of power quality monitoring system based on FPGA;

基于现场可编程门阵列的电能质量监测系统设计

Study on Design Method of Telemetering Data Processing Interface Based on FPGA Technology;

基于现场可编程门阵列技术的遥测数据处理接口设计方法研究

3) FPGA

现场可编程逻辑门阵列

Taking full frame CCD image sensor FTF4027M produced by Dalsa as example,we studied the principle and driver schedule of full frame CCD device,and put forward a FPGA technology based method for design of the full frame CCD drivers.

以加拿大Dalsa公司的全帧CCD图像传感器FTF4027M为例,在研究了全帧CCD结构和驱动时序的基础上,提出了基于现场可编程逻辑门阵列(FPGA)的驱动脉冲设计方法。

Therefore in this paper a circuit is designed based on Field Programmable Gate Array(FPGA) which is used to control the inverter composed of high-frequency link controlled by phase-shift PWM technique and cycloconverter.

因此,针对移相PWM控制高频链周波变换型逆变器设计了一套基于现场可编程逻辑门阵列(FieldProgrammableGateArray,FPGA)的控制电路。

The realizing method of DDS with FPGA and the numerical controlled oscillator(NCO) design method of TOM finding-table and phase counter are introduced in detail.

介绍了利用现场可编程逻辑门阵列(FPGA)实现直接数字频率合成信号发生器(DDS)的原理,重点介绍了DDS技术在FPGA中的实现方法以及数控振荡器(NCD)的ROM查找表设计和相位累加器设计,给出了采用FPGA芯片进行直接数字频率合成信号发生器的仿真结果以及系统顶层设计原理图。

4) FPGA

可编程逻辑器件FPGA

This interpolator is programmed by VHDL(Very high speed integrate circuit Hardware Description Language),compiled and simulated by quartusⅡ tool,and realized through FPGA.

主要讨论数字积分法圆弧插补器的结构,利用大规模可编程逻辑器件FPGA,用VHDL语言进行编程,通过QUAR-TUS Ⅱ软件进行编译仿真,下载到FPGA中进行实现,简化了硬件插补器的结构,提高了灵活性。

This paper introduces the design course of the parameter setting and transferring module of the SCS based on FPGA.

利用可编程逻辑器件FPGA,并基于超高速硬件描述语言VHDL在Xilinx公司的SpartanⅡ系列的XC2S2005PQ208芯片上编程实现,实现了控制过程中人为设定参数,运行过程中直接调用该参数的功能。

The design and implementation of universal automatic mixing material system based on FPGA is presented.

介绍了基于FPGA的通用型自动配料控制系统的设计和工程实现过程;设计采用了可编程逻辑器件FPGA,并基于超高速硬件描述语言VHDL在Xilinx公司的SpartanⅡ系列的XC2S100ePQ208-6芯片上编程实现;该系统由控制器、存储器、分频器、计数器、串口通讯、微型打印机及显示译码器组成;该设计可以完成人为设定参数,由控制系统调用运行,并可完成手动及自动配料,并在自动配料后对各个数据进行统计,产生相应的各种报表。

5) FPGA

现场可编程门阵列技术（FPGA）

6) FPGA

现场可编程门列阵FPGA

补充资料：WG型机动车驾驶适应性测评系统检测现场

WG型机动车驾驶适应性测评系统检测现场

　　子检蕊晕机“车“驶适“性测评系
　　

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引

1) FPGA FPGA 1. The design of well logging depth signal simulator based on FPGA device; 基于FPGA的测井深度信号模拟器设计 2. Research on and Application of DSP & FPGA Data Processing System; DSP+FPGA数据处理系统的研究与应用 3. Design of FPGA in Motion Control System; FPGA在运动控制系统中的设计 2) FPGA 现场可编程门阵列 1. Stepping Motor Control System Based on FPGA; 基于现场可编程门阵列的步进电机控制系统 2. Design of power quality monitoring system based on FPGA; 基于现场可编程门阵列的电能质量监测系统设计 3. Study on Design Method of Telemetering Data Processing Interface Based on FPGA Technology; 基于现场可编程门阵列技术的遥测数据处理接口设计方法研究 3) FPGA 现场可编程逻辑门阵列 1. Taking full frame CCD image sensor FTF4027M produced by Dalsa as example,we studied the principle and driver schedule of full frame CCD device,and put forward a FPGA technology based method for design of the full frame CCD drivers. 以加拿大Dalsa公司的全帧CCD图像传感器FTF4027M为例,在研究了全帧CCD结构和驱动时序的基础上,提出了基于现场可编程逻辑门阵列(FPGA)的驱动脉冲设计方法。 2. Therefore in this paper a circuit is designed based on Field Programmable Gate Array(FPGA) which is used to control the inverter composed of high-frequency link controlled by phase-shift PWM technique and cycloconverter. 因此,针对移相PWM控制高频链周波变换型逆变器设计了一套基于现场可编程逻辑门阵列(FieldProgrammableGateArray,FPGA)的控制电路。 3. The realizing method of DDS with FPGA and the numerical controlled oscillator(NCO) design method of TOM finding-table and phase counter are introduced in detail. 介绍了利用现场可编程逻辑门阵列(FPGA)实现直接数字频率合成信号发生器(DDS)的原理,重点介绍了DDS技术在FPGA中的实现方法以及数控振荡器(NCD)的ROM查找表设计和相位累加器设计,给出了采用FPGA芯片进行直接数字频率合成信号发生器的仿真结果以及系统顶层设计原理图。 4) FPGA 可编程逻辑器件FPGA 1. This interpolator is programmed by VHDL(Very high speed integrate circuit Hardware Description Language),compiled and simulated by quartusⅡ tool,and realized through FPGA. 主要讨论数字积分法圆弧插补器的结构,利用大规模可编程逻辑器件FPGA,用VHDL语言进行编程,通过QUAR-TUS Ⅱ软件进行编译仿真,下载到FPGA中进行实现,简化了硬件插补器的结构,提高了灵活性。 2. This paper introduces the design course of the parameter setting and transferring module of the SCS based on FPGA. 利用可编程逻辑器件FPGA,并基于超高速硬件描述语言VHDL在Xilinx公司的SpartanⅡ系列的XC2S2005PQ208芯片上编程实现,实现了控制过程中人为设定参数,运行过程中直接调用该参数的功能。 3. The design and implementation of universal automatic mixing material system based on FPGA is presented. 介绍了基于FPGA的通用型自动配料控制系统的设计和工程实现过程;设计采用了可编程逻辑器件FPGA,并基于超高速硬件描述语言VHDL在Xilinx公司的SpartanⅡ系列的XC2S100ePQ208-6芯片上编程实现;该系统由控制器、存储器、分频器、计数器、串口通讯、微型打印机及显示译码器组成;该设计可以完成人为设定参数,由控制系统调用运行,并可完成手动及自动配料,并在自动配料后对各个数据进行统计,产生相应的各种报表。 5) FPGA 现场可编程门阵列技术（FPGA） 6) FPGA 现场可编程门列阵FPGA 补充资料：WG型机动车驾驶适应性测评系统检测现场 WG型机动车驾驶适应性测评系统检测现场　　子检蕊晕机“车“驶适“性测评系　　说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com