说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 试样
1)  Sample [英]['sɑ:mpl]  [美]['sæmpḷ]
试样
1.
On the importance of undisturbed soil sample s preparation in geotechnical test;
浅谈原状土试样制备在土工试验中的重要性
2.
The macroscopical survey and micro cosmic analysis of unqualified cold bending test samples of Q235and HP295hot -rolling plate had been stu died.
对Q235及HP295热轧板冷弯不合格试样进行了宏观观察及微观分析。
3.
The effects of different preparation of beer samples on the determination of beer concentration were investigated in the aspects of alcohol content, real extract and original extract, and preliminary study on its contributing factors was also done in this paper.
研究了不同啤酒试样制备方法对测定啤酒中酒精度、真正浓度、原麦汁浓度所产生的影响 ,并初步探讨了影响因
2)  specimen [英]['spesɪmən]  [美]['spɛsəmən]
试样
1.
Discussion on Classification and Assessment of the Steel Plate Specimens after Tensile or Cold Bending Test
钢板拉伸与冷弯试验后试样分类及评定的探讨
2.
The relevant tensile test specimens were designed and tested; then the test results were compared and analyzed to obtain the ultimate bearing stress.
首先设计了相应的拉伸试样,进而对试验结果进行了对比分析,得到补焊焊缝的极限承载应力,为补焊管道的安全评价提供了依据。
3.
Elastic-plastic stress fields on the crack-tips were obtained by use of the finite element analysis to the single edge notched bend(SENB) and single edge notched tension(SENT) specimens of irradiated A533B pressure vessel steel at-60 ℃,-40 ℃,-20 ℃temperatures and at various loading levels.
针对经过辐照的A533B压力容器钢,采用有限元方法对单边缺口弯曲和拉伸试样进行弹塑性数值计算。
3)  test sample
试样
1.
The preparation technology of test sample in infrared absorption spectroscopy analysis;
现代红外光谱分析中的试样制备技术
2.
This paper theoretically analyzes the additional stress of test sample caused by inaccurate axisymmetric stress distribution of the upper and lower grip of tension tester and the meaning of e calculation formula.
主要从理论上分析了由于试验机上下夹头不同轴给试样所带来的附加应力,以及同轴度e计算公式的 内在涵义,实际上反映了附加弯曲应力占拉应力的百分数。
4)  samples [英]['sæmpl]  [美]['sæmpḷ]
试样
1.
Through analysing the samples;finding the factors that effect the accuracy of the results and eliminating the disturbances that can improve the accuracy of the examination an employ its complete, rapid and accurote function that beat benefit to the production.
由于科学技术的发展,直读光谱较普遍地应用在钢铁分析中,通过研究,找出试样影响分析准确度的因素,并且消除其干扰,可以提高测试的准确性,充分发挥光谱仪快速、准确配合生产的作用。
2.
It was found that quenching temperature,hold time,delay time,bundling mode of samples,width of grip zone and test method at yield point were the main influence factors on the yield strength of LY12MCZ alloy.
分析了影响LY12MCZ屈服强度的主要因素,指出淬火温度、保温时间、淬火转移时间、试样捆扎、试样工作部的宽度、屈服点的测试方法是影响LY12MCZ屈服强度的根本原因。
5)  Test piece
试样
1.
Discussion of tensile property and test piece location;
钢带试样位向及拉伸性能的探讨
2.
In this paper, on the basis of practice, an analysis ismade on the different effects of the surface cementation pre-vention of the casted steel in casting and in inspecting test piece,and a law is reached, i.
本文通过生产实践总结了铸铁件铸入钢管防渗碳的效果与铸入检测试样中钢管防渗碳效果之差别。
6)  specimens [英]['spesimən]  [美]['spɛsəmən]
试样
补充资料:试样
试样
sample

   从大量物料(分析对象的总体)中取得的有代表性的一小部分。又称样品。在误差允许范围内,这一小部分试样应能代表大量物料的组成。通常把试样准备称为分析的基础,因为分析结果是否准确,基于试样代表性的好坏。分析对象可分均相的和非均相的两大类。像混合良好的气体或液体以及纯金属等均相物料,取样通常比较容易。对于不均匀的固态物质,取样就较困难,应按一定程序(例如工业标准规定的程序)取样,并对颗粒仍然较大的试样,经过破碎、缩分、研磨、过筛(无机物料一般要求通过100目筛孔)等步骤,制备成适合于作分析用的试样。试样在制备过程中,常需使用机械进行破碎、缩分、研磨等,机械磨损常会导致铁、锰等元素污染试样,应尽可能采用特硬耐磨材料,或采用玛瑙研钵手工研磨,以求减轻污染。供分析用的生物试样的制备,也有金属污染的问题,宜用瓷制的研钵和杵进行手工研磨,以减少污染。还有一种稀用方法就是经液氮冷冻之后,用锤敲打来压碎动物组织的试样。
   试样分解是指湿法分析中将试样内的被测组分转入适当溶液中的过程。分解试样时需注意:①应合理地快而有效。②不应腐蚀容器。③不应引入会干扰以后分析的任何物质,除非这种引入物是易于除去的。④不应引入过量的盐,即使这些盐是相对惰性的,也不应引入太多。⑤不致引起任何组分的损失,除非是试样中那些不要求分析的组分。⑥最好不用不寻常的设备。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条