1) spinning
[英]['spɪnɪŋ] [美]['spɪnɪŋ]
旋压
1.
Defect analysis of spinning aluminium alloy taper parts with thin wall;
薄壁铝合金锥形件旋压过程的缺陷分析
2.
FEM numerical simulation of spinning processing for TC4 alloy;
TC4钛合金旋压有限元数值模拟分析
3.
Effects of the forming parameters on the spinning force of the oblique tubes forward spinning;
成形工艺参数对倾斜类管件正旋时旋压力的影响规律研究
2) spin
[英][spɪn] [美][spɪn]
旋压
1.
The experimental analysis research of spinning technology force torque and power;
旋压工艺力、扭矩和功率的实验分析研究
2.
This paper studied the calculating method of the spiral fluted tube's spinning force, which can provide basic theory for designing spinning shaping equipemnt, establishing spinning shaping technology and designing spinning tools.
研究了薄壁圆管螺旋槽旋压成形时力的计算方法 ,可为设计旋压成形设备、编制旋压工艺、设计旋压工夹具提供理论依据 。
3.
Being aimed at the feature of the great difference shape and size between the head and the pole of the product,this paper introduces the new technology of upsetting the seamless steel taue first and then spinning it this processes ,solves processing difficulty and increases the utilization ratio of materiae.
针对该产品头部形状与尺寸同杆部相差较大的特点，采用无缝管先镦头后旋压加工成形的工艺方案。
3) oil_pressured spinning
增压旋压
4) spinning
[英]['spɪnɪŋ] [美]['spɪnɪŋ]
旋压加工
1.
The processing research on technology of rotary awl cover spinning;
回转锥型罩旋压加工工艺的研究
2.
By applying FEM numerical simulation technology to spinning process,the reasonable craft parameters can be achieved,the quality of the spinning products can be improved and the expense on trials can be reduced.
使用数值模拟技术对旋压加工过程进行模拟能为生产提供合理的工艺参数、提高产品质量、减少试加工过程的消耗。
5) power spinning
强力旋压
1.
Research on power spinning forming process of aluminium alloy cylinders with inner ribs;
带内筋铝合金筒形件强力旋压成形工艺研究
2.
The development and present situation analysis of power spinning of cylinders;
筒形件强力旋压发展过程及其现状分析
3.
Analysis of power spinning process parameters selection mode for cylinders;
筒形件强力旋压工艺参数选取方式分析
6) roto-jet pressurizing
旋喷加压
补充资料：旋压
板坯与芯模共同旋?晒趼纸⑹┘友沽Γ拱迮鹘籼灸Ｖ鸬憔植勘湫蔚?冲压成形工艺（见图）。旋压可制造各种轴对称旋转体零件，如扬声器、弹体、高压容器封头、铜锣；也可用于气瓶收口、筒坯成形等。旋压的特点是：用很小的变形力可成形很大的工件；使用设备比较简单，中小尺寸的薄板件可用普通车床旋压；模具简单，只需要一块芯模，材质要求低。旋压适用于小批生产,因其只能加工旋转体零件,局限性较大，生产率低。旋压可用专门机械，采用仿形旋压和数字控制旋压。在旋压成形的同时使板厚减薄的工艺称为变薄旋压,又称强力旋压,多用于加工锥形件、薄壁的管形件等，也可用以旋压大直径的深筒，再剖开后制成平板。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条