1) TC4 alloy
TC4合金
1.
Effect of low temperature on tensile properties of aged TC4 alloy;
低温对时效态TC4合金拉伸性能的影响
2.
The equal channel angular pressing on TC4 alloy was numerically simulated by applying a thermo-mechanical coupled technology with the commercial FEM software DEFORM-3D.
采用商用有限元软件DEFORM-3D的热力耦合分析技术,对TC4合金的等径角挤压工艺进行了数值模拟。
3.
Effect of holding time on the deformation behavior and high temperature microstructures of hydrogenation TC4 alloy at high temperature has been investigated using tensile tests and SEM technology.
文章通过高温拉伸实验和扫描电镜观察,研究了保温时间对置氢TC4合金超塑流动特性及其组织的影响,结合高温组织和钛氢相图分析了影响机制。
3) TC4 Ti alloy
TC4钛合金
1.
Welded joint property of TC4 Ti alloy by electron beam welding;
TC4钛合金电子束焊接头性能研究
2.
Stretching fixation was proposed to improve milling surface quality of TC4 Ti alloy.
在TC4钛合金铣削过程中采用拉伸装夹技术强化表面质量。
3.
The thick plate of TC4 Ti alloy is welded by TIG,the structure of welding joint of Ti-6Al-4V is studied and analysed,at the same time,the property of welding joint is measured,as a result, appropriate welding craft and welding method are found.
采用 TIG 焊方法对 TC4钛合金厚板进行焊接,分析、研究了 Ti-6Al-4V 合金焊接接头的组织,测定了 Ti-6Al-4V 合金焊接接头的性能,摸索出了合适的焊接方法与工艺。
4) TC4 titanium alloy
TC4钛合金
1.
Hot spinning technology of wheel rim of TC4 titanium alloy;
TC4钛合金轮圈热旋成形技术研究
2.
Effects of local heat treatment by electron beam on microstructure and properties of TC4 titanium alloy welded joint;
电子束局部热处理对TC4钛合金焊接接头组织和性能的影响
3.
Microstructures and high-temperature properties of TC4 titanium alloy joints welded by electron beam;
TC4钛合金电子束焊接接头高温性能与组织
5) TC4-DT
TC4-DT合金
1.
Mathematical Description on Fatigue Crack Growth Rate of the Damage-Tolerance TC4-DT Alloy;
损伤容限型TC4-DT合金疲劳裂纹扩展速率的数学描述
6) TC4 alloy
TC4钛合金
1.
Microstructures and properties of TC4 alloy joints welded by the e lectron beam welding;
TC4钛合金电子束焊接接头组织和性能
2.
Study on the precise welding technology of TC4 alloy;
TC4钛合金精密焊接工艺研究
3.
Active brazing of SiO_2 glass ceramic to TC4 alloy
SiO_2玻璃陶瓷与TC4钛合金的活性钎焊
补充资料：TC橡胶
分子式：
CAS号：
性质：又称TC橡胶。按规定的配方标定生胶的硫化速率，并分别用蓝、黄、红三种不同颜色圈标志区分硫化速率为快、中、慢三个等级。凡按工艺性能标准进行分级的天然橡胶称为工艺分级天然橡胶。
CAS号：
性质：又称TC橡胶。按规定的配方标定生胶的硫化速率，并分别用蓝、黄、红三种不同颜色圈标志区分硫化速率为快、中、慢三个等级。凡按工艺性能标准进行分级的天然橡胶称为工艺分级天然橡胶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条