1) pilot test
中试
1.
Wastewater treatment pilot tests in a coking plant using HSB technology;
基于HSB微生物技术的焦化废水处理中试
2.
Research on the pilot test of the treatment of printing and dyeing wastewater by the yeast biofilm reactor
酵母菌生物膜系统对印染废水的中试处理研究
3.
Pilot production of Mg-Al hydrotalcite was investigated and pilot test procedure was obtained.
对镁铝水滑石的生产进行了中试研究,获取了中试生产的工艺条件。
2) pilot scale
中试
1.
Production of 1,3-propanediol by microbiological fermentation on a pilot scale;
微生物发酵法中试生产1,3-丙二醇
2.
Intermittent aeration system to treat municipal sewage in a pilot scale anoxic/anaerobic/carrousel oxidation ditch process;
间歇曝气A~2/C氧化沟工艺处理城市污水中试研究
3.
Fermentative production of microbial transglutaminase(MTG) on pilot scale;
发酵法生产谷氨酰胺转胺酶(MTG)的中试研究
3) Pilot
[英]['paɪlət] [美]['paɪlət]
中试
1.
Study on Pilot of Citric Acid Production Wastewater with UASB-BIOFOR Process;
UASB-BIOFOR滤池组合工艺处理柠檬酸废水的中试研究
2.
Development of the solid-base catalyst X/Y/MgO/γ-Al_2O_3 and optimization of technological conditions of the pilot using the catalyst for Jatropha curcas L.biodiesel preparation;
固体碱催化剂X/Y/MgO/γ-Al_2O_3的研发及其催化麻疯树籽油制备生物柴油中试工艺条件的优选
3.
The characteristics of heavy metals(Cd,Pb,Zn,Cu,Cr and Ni) were studied during pilot melting process of waste incineration fly ash,and it mainly focused on the solidification of those heavy metals in molten slag.
通过中试试验研究垃圾焚烧飞灰熔融过程重金属Cd、Pb、Zn、Cu、Cr和Ni的迁移特性,着重研究重金属在熔渣中的固化效果,考察了温度(1290℃、1320℃、1360℃)、助熔剂(10%的玻璃粉)、冷却方式(水冷、空冷)对重金属固定率的影响。
4) pilot-scale
中试
1.
Start-up of a pilot-scale HAR for treatment of low strength domestic sewage at ambient temperature;
常温下HAR处理低浓度生活污水中试启动
2.
Studies on the treatment of printing and dyeing wastewater with pilot-scale fluidized bed photocatalytic oxidization.;
流化床光催化氧化处理印染废水中试研究
3.
A pilot-scale single phase anaerobic reactor for treatment of high solid organic waste
有机垃圾单级高固体厌氧消化的中试实验
5) pilot plant
中试
1.
Research on new brand of solution polymerized butadiene-styrene rubber in pilot plant;
充油溶聚丁苯橡胶新牌号Y837V中试研究
2.
Study on semi-continuous bulk polymerization for impact-resistant SMA in a pilot plant;
抗冲级苯乙烯-马来酸酐共聚树脂的本体半连续中试研究
3.
Synthesis of high transparency impact polystyrene in pilot plant;
高透明抗冲聚苯乙烯中试研究
6) pilot plant test
中试
1.
9×1010 cfu/mL and there was no significant different between pilot plant test and lab scale test.
caseiZhang高密度培养小试(3L)基础上,进行30L到150L逐级放大中试生产工艺的研究以确定规模化生产工艺。
补充资料：中试
1.考试合格。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条