说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 批次
1)  batch [英][bætʃ]  [美][bætʃ]
批次
1.
Reducing the quality fluctuation of PVC resin produced by calcium carbide method among each production batch;
缩小电石法PVC树脂批次间的质量波动
2.
In order to find a method for determing transportation batch and tank capacity of short-small product pipeline,the Anqing-Hefei product pipeline is taken as an example,which has such characteristics as a short route,a small diameter,no offtake stations,no new tank and little contaminated product loss.
为了研究短小成品油管道输送批次和罐容的确定方法,以安庆-合肥成品油管道为例,根据该工程线路短、管径小、不考虑分输、不需要新建储罐、混油量少等特点,经过综合比较确定管道输送的最大批次数,再综合分析首末站的实际情况,以充分利用首末站现有储罐、方便运行管理、减少混油损失为原则,来确定合适的批次和首末站的罐容。
3.
Importance of batch management is hilighted and regulation plus caution involved with batch management is given hereunder.
阐述了批次管理的意义和做好批次管理工作的原则及注意事项。
2)  60 times
60批次
1.
The results proved that the immobilized enzyme could be used repeatedly 60 times.
本文探讨了固定化酶生产蔗果低聚糖糖浆的生产技术,研究证明固定化酶可生产60批次,并对生产过程中pH值、灭菌时间、灭菌温度、不同原料糖源的因素进行了探讨,对保质期内产品中蔗果低聚糖(GF2、GF3、GF4)含量的变化进行测定。
3)  tests of batch equipments
批次定检
1.
To resolve the problem of low locating rate in fault diagnosis of air-borne radio equipment,the idea was proposed to using preceding fault information in the tests of batch equipments.
本文针对机载无线电设备故障诊断定位率低的问题,提出利用先验故障信息指导批次定检的思想。
4)  batch management
批次管理
1.
Research on Product Tracking and Tracing Based on Batch Management;
基于批次管理的产品追踪溯源的研究
5)  bill of lots(BOL)
批次清单
6)  spawning number
产卵批次
1.
The results showed that the number of capsule and egg in each capsule decreasing with the spawning number increasin g;the length and width of egg capsule decreasing but thickness increasing,the pr oportion of sunflower-seed-shape capsule decreasing and rod-shape inc.
结果表明:随着亲螺产卵批次的增加,亲螺产卵囊数、卵囊含卵数、产卵量逐次减少;卵囊长、宽逐次变小,厚逐次增加,形状由葵花子片状的比例大变为棒状的比例大;幼虫浮游期逐次延长;变态期幼虫壳长逐次变小;各批次之间的变态率逐次降低;卵径、孵化率、出囊幼虫大小差异不显著。
补充资料:美国4st60md60t重型设备运输半拖车

国别 美国

名称 4st60md 60t重型设备运输半拖车

model 4st60md 60-tonne heavy equipment transporter semi-trailer

生产单位 fwd国际有限公司

fwd international inc,us

现状 准备生产

概述

该车是一种具有公路或越野用的双弯低架式重型半拖车,能够运载轮式或履带式车辆。工作平台主要铺板可以是钢板或木板。这种半拖车有4个桥,在与牵引车脱离情况下可以用2个前支腿帮助支撑,支腿的升降以2种速度机械操作。装卸跳板均为钢制或铝制,装载宽度可以调节。可用绞盘装卸负载,当负载装上工作平台后,用8个可拆卸围档、4个钢制楔形垫块和链条固定装置固定。装卸跳板下面的支腿有助于装卸负载或空载时的稳定性。该车采用弹簧带扭杆的摆杆式悬挂装置,每个系统均有8片大型钢板弹簧。在拖车的鹅颈状部可携带2个备用轮胎,顶部安装1个大储存箱,用来存放全套工具。车辆采用了空气制动器。电气系统制式的为12v,也可根据用户需要改装。可选用单弯低架式工作台。

性能数据

重量(空载)       12450kg

最大有效负载      60000kg

每桥负载        13590kg

车长

总长         16.129m

工作平台,双弯低架式 6.934m

桥上方的工作平台   5.08m

车宽          3.6067m

车高

总高         2.0447m

牵引座立轴      1.5621m

工作平台,满载    1.143m

车底距地高       0.66m

轴距          1.3208m

轮胎规格        14.00×20

轮胎数量        16个+2个备用

电气系统电压      12v(可选用24v)

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条