1) Bolted connection
螺栓连接
1.
Contact friction mechanism and finite element analysis of beam-to-column bolted connections;
梁柱螺栓连接中接触摩擦机理及有限元分析
2.
The performance of bolted connection in aluminum alloy which carried both tension and shear are analyzed based upon the finite element analysis(FEA).
通过有限元分析了铝合金构件普通螺栓连接同时抗拉抗剪性能,选取了4。
2) bolt connection
螺栓连接
1.
The application of contact friction in bolt connection;
接触摩擦在螺栓连接中的应用
2.
Finite element analysis of pneumatic cylinder bolt connection stress;
气缸的螺栓连接有限元应力分析
3.
In this paper,we adopt the common Finite Element Analysis software-ANSYS to compute and analyze the force alternation and destroy form of the high strength friction grip bolt connection in principle,and get the force distribution diagram.
采用大型有限元分析软件ANSYS,对钢结构高强度螺栓连接的受力分布规律进行了计算和分析,得出了该构件的受力分布图,从理论上对高强度螺栓连接的破坏形式和受力变化进行了分析研究,为进一步改进高强螺栓连接构件的受力状况和结构设计提供了必要的理论依据。
3) bolt joint
螺栓连接
1.
Aircraft structures, especially some important units, are commonly fabricated by the use of mechanical bolt joints.
螺栓连接是飞机结构常用的连接方式，特别是一些重要的部件常采用这种连接方法。
2.
In the engineering,mechanism connect(bolt or rivet)of composite structure is very common,especially the bolt joint.
在实际工程中,复合材料结构连接方式常采用机械连接形式(螺栓或铆钉)来连结复合材料构件和金属构件,而其中尤以螺栓连接更为常见。
3.
So as to breach the box form structure of tradition steeliness bogie frame, it uses the cast aluminum alloy and Aluminum profile to replace steels and adopt the method of bolt joint to assemble the whole structure.
参照传统构架的结构形式对铝合金构架进行外形尺寸设计,确定出构架的具体成型方式—采用铸造铝合金和铝型材分别成型,然后进行螺栓连接。
4) bolting
[英][bəult] [美][bolt]
螺栓连接
1.
Optimum analysis of bolting top-joint of electric power transformation truss-column;
变电构架柱螺栓连接柱顶节点优化分析
2.
Compared with the traditional welding truss-column in shape of A,the members of the bolting top-joint are much smaller than the common welding joint.
与传统焊接A字变电构架柱相比,新型构架柱螺栓连接柱头各构件关联体小,工厂加工、运输和安装较简单,尤其是镀锌难度和镀锌成本能较大幅度地降低,整体经济性较好。
3.
A new type of bolting top-joint for power transformation truss-column was proposed.
提出变电构架柱新型螺栓连接柱头形式,通过试验研究和有限元计算相结合的方法,验证新型构架柱的可行性。
5) bolted joints
螺栓连接
1.
A review of vibration-based condition monitroring and indentificaiton for mechanical bolted joints
机械螺栓连接状态监测和辨识方法研究进展
2.
In order to improve the accuracy and reliability of bolted joints in design,further in- vestigation on the norm,criterion and basic calculation formulas in strength design are made in this paper.
为了进一步提高螺栓连接设计计算的精确度,本文从强度设计准则、设计规范、基本计算公式等方面作了一些探讨,并着重对以屈服极限为门槛值的强度计算进行了可靠性分析。
3.
In this paper, the characteristics and application of tightening method of bolted joints up to the yield point(TMYP) are introduced.
介绍螺栓连接屈服点拧紧法的特性及应用情况。
6) bolted joint
螺栓连接
1.
The standard and application range of the material of the connection were selected,which provided the suggestions on the proper application of the bolted joint in steel structure and the precautions in the conversion design.
通过一工程建设实例,对工艺钢结构转化设计所发生的连接材料及连接方式的相关问题进行解剖分析,为螺栓连接在钢结构中的正确应用,以及在转化设计中的注意事项提供了可参考性意见。
补充资料：螺栓
1.连接用的机械零件。圆杆﹐上有螺纹﹐配有螺母﹐可以拆卸。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条