1) drilling rig
钻机
1.
Application of load sensitive technology to mine roadway hydraulic driving head drilling rig;
负载敏感技术在全液压动力头式坑道钻机上的应用
2.
Discussion and practice of well electricity system of foreign drilling rig;
对国外钻机井电系统标准的探讨与实践
2) rig
[英][rɪɡ] [美][rɪg]
钻机
1.
Designing of the compound chain box used in the drilling rig;
钻机整体式链条并车箱的设计
2.
The design principle of ideal rig and modern design theory;
理想钻机的设计思想与现代设计理念
3.
Analyses of model seletion for 5 000 m rig;
5000m钻机选型分析
3) drilling machine
钻机
1.
The design of turbo-pressure and circulation seafloor sampling drilling machine;
涡轮加压和循环式海底取样钻机设计
2.
Horizontal direction drilling machine power head construction optimize analysis and test research;
水平定向钻机动力头结构优化分析与试验研究
3.
Study on leveling control algorithm for drilling machine platforms in submarine
海底钻机平台调平控制算法研究
4) Drill
[英][drɪl] [美][drɪl]
钻机
1.
Multi-Sensor Data Fusion-Based Drilling in Advanced Geological Exploration;
基于多源数据融合的钻机超前地质探测系统
2.
The Database Used in the Expert Systems of Drill Design Research;
地质钻机设计专家系统中钻机数据库的研究与开发
3.
The improvement of KY—150 type rotary drill travel unit;
KY-150型牙轮钻机行走部改造
5) drill rig
钻机
1.
Development and application of mode ZJ40/2250JD drill rig;
ZJ40JD/2250JD钻机的研制与应用
2.
Development of mode ZJ40/2250LDB drill rig by mechanical-electric compound drive;
ZJ40/2250LDB型机电复合驱动石油钻机设计
3.
Research on Load Self-adaptive Hydraulic Control System of Drill Rig;
钻机负载自适应液压控制系统的研究
6) boring machine
钻机
1.
In the construction of the bored piles for the piers,the single-rope percussion boring machine,the YCJF-25 percussion and reverse circulation boring machine,the GF-300 rotary boring machine and the ZSD-300a all-hydraulic unit head boring machine are selected.
新建武汉至宜昌铁路工程蔡家湾汉江特大桥167号、168号墩存在入岩较深、岩石强度较高、出现岩溶等特点,施工中选择单绳冲击钻机、YCJF-25型冲击反循环钻机、GF-300型回旋钻机和ZSD-300a型全液压动力头钻机。
2.
In this paper, the application of drilling technology with raise-boring machine to the inlet well construction of power station was introduced, in which the boring machine and drilling techniques were improved.
本文介绍了采用反井钻井技术钻凿抽水蓄能电站引水竖井的施工方法,并针对钻凿极硬岩石钻机能力不足的问题,对钻机和钻井工艺进行了相应的改进,取得了显著的成效。
3.
In this paper,the principal technical performance of KTY3000A unit head boring machine, calculation method for boring parameters, construction technology and examples of applications of the boring machine to the construction of large diameter piles are presented.
介绍了KTY3000A型动力头钻机主要技术性能和在大直径桩孔施工中钻进参数的计算方法、施工工艺及应用实例。
补充资料：钻机
| 钻机 drill 在地质勘探中，带动钻具向地下钻进，获取实物地质资料的机械设备。又称钻探机。主要作用是带动钻具破碎孔底岩石，下入或提出在孔内的钻具。可用于钻取岩心、矿心、岩屑、气态样、液态样等，以探明地下地质和矿产资源等情况。钻进深度为2～15000米。一般由动力机、回转器或动力头、孔底加压与给进装置、卷扬钻机钻床机等4部分组成。按破碎岩石的方式，可分为回转式钻机、冲击式钻机、冲击回转式钻机等；按钻探深度，可分为地表 取样机（2～50米）、浅孔钻机（50～300米）、中深孔钻机（300～600米）、深孔钻机（600～6000米）、超深孔钻机（6000～15000米）；按用途，可分为岩心钻机、水文地质水井钻机、石油钻机等；按施工现场，可分为 地表钻机、坑道钻机、海底沉没式钻机等。
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条