1) manipulator
[英][mə'nɪpjuleɪtə(r)] [美][mə'nɪpjə'letɚ]
操作机
1.
This paper analyzes the causes of ruptures in the clamping arm of the 40-t forging manipulator.
分析引起40t锻造操作机钳臂断裂的原因,利用力学结构原理,将球头式改为连杆式连接,成功解决了操作过程中钳臂断裂问题,收到了很好的经济和社会效益。
2.
The reason why the tong arm of the manipulator with large tonnage breaks has been analyzed.
分析了造成大吨位操作机钳臂断裂的原因。
3.
Study on the repeatability of kinematically redundant manipulators under pseudoinverse control is reviewed in this paper.
本文对冗余度机器人操作机伪逆控制重复性的研究进行了系统的分析。
2) human-machine operation
人机操作
1.
The human-machine operation analysis and improvement of taking and putting operation in vulcanized of automobile tyre;
汽车轮胎硫化工序中轮胎取放的人机操作分析和改进
2.
Improvement of the production line of automobile rear backplane based on the human-machine operation analysis;
基于人机操作分析的某汽车零配件生产流程改进研究
3) operating mechanism
操作机构
1.
Coordination between protection device control circuit and breaker operating mechanism circuit
保护控制回路与三菱断路器操作机构的配合
2.
A novel dynamic model of molded case circuit breaker operating mechanisms was built based on multi-body dynamics principle adopting virtual prototyping technology.
采用基于多体动力学原理的虚拟样机技术,建立了塑料外壳式断路器操作机构的动力学模型。
4) operation mechanism
操作机构
1.
Tripping force of circuit breaker operation mechanism has severe influence on work reliability of circuit breaker.
断路器操作机构的脱扣力对断路器工作的可靠性具有较大的影响,通过分析脱扣力的影响因素,制订了在不改变断路器结构的情况下,如何稳定断路器操作机构脱扣力的几点措施。
2.
With virtual prototyping technology, the simulation model for the operation mechanism of MCCB can be built, and experiments have verified the model.
应用虚拟样机技术,建立了低压塑壳断路器MCCB操作机构运动特性的仿真模型,并用实验验证了模型的正确性。
3.
With virtual prototype technology, the simulation model of operation mechanism moving characteristics of moulded case circuit breaker(MCCB) was built and the correctness of this model was verified by experiments.
应用虚拟样机技术,首先建立了塑料外壳式断路器(MCCB)操作机构运动特性的仿真模型,并用实验验证了模型的正确性;然后耦合电路、电磁场和机械运动方程,考虑电动斥力的作用,分析了电弧电压、合闸相角、预期短路电流、机构开始动作时间及气动斥力对MCCB分断过程的影响。
5) operating mechanisms
操作机构
1.
Adopting ADAMS, a virtual prototype technique software to build a novel dynamical model of rotating two-breakers modeled case circuit breaker operating mechanisms and also to make the dynamic motion simulation.
应用虚拟样机技术商业软件ADAMS创建了旋转式双断点塑壳断路器操作机构的动力学模型,并进行了动态仿真。
2.
A novel dynamic model of the operating mechanisms of low-voltage molded case circuit breaker is set up by adopting automatic dynamic analysis of mechanical system(ADAMS), a software package based on the theory of multi-body dynamics.
采用基于多体动力学原理的软件包ADAMS,建立了低压塑壳断路器操作机构的动力学模型,并通过实验测试了该型号断路器的机械性能。
6) multi-manipulator
多操作机
1.
Design on the substructure control system for multi-manipulator tooth arrangement robot;
多操作机排牙机器人的下位机控制系统设计
2.
The tooth arrangement robot based on multi-manipulator is a full denture manufacturing system of computer aided design and robot aided operation.
基于多操作机的排牙机器人是一套计算机辅助设计、机器人辅助操作的全口义齿制作系统。
补充资料：锻造操作机
用以夹持锻坯配合水压机或锻锤完成送进、转动、调头等主要动作的辅助锻压机械。锻造操作机有助于改善劳动条件，提高生产效率。根据需要，操作机也可用于装炉、出炉，并可实现遥控和与主机联动。操作机结构分有轨和无轨两种，其传动方式有机械式、液压式和混合式等。此外，还有专门用于某些辅助工序的操作机，如装取料操作机和工具操作机等。为了配合操作机的工作，有时还配置锻坯回转台，以方便锻坯的调头。在模锻和大件冲压中，机械手的应用已日益普遍，这样的机械手实际上是一种自动的锻造操作机。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条