1) section steel
型钢
1.
Practice on equal proportional laser treatment of section steel rolls;
型钢轧辊等比例激光表面强化技术与实践
2.
Analysis and countermeasure for fracture forms of rolls in hot rolling section steel;
热轧型钢轧辊的断裂行为分析及对策
3.
Study and design on the piling model of section steel;
型钢堆垛型式的设计研究
2) shaped steel
型钢
1.
Simulation analysis of bearing capacity of short-leg T-shaped steel reinforced concrete shear wall;
T形型钢混凝土短肢剪力墙承载力模拟分析
2.
A simplified calculation about section selection of shaped steel members subject to bending and tension;
型钢截面拉弯构件的一种简化计算方法
3.
When the depth of excavation is not too deep,reinforced cemented soil retaining walls can be used,where shaped steel is applied in the zone subjected to tensile force.
对于一些开挖深度不大的基坑工程,可以采用在受拉区加入型钢的加筋水泥土挡墙支护形式。
3) shape steel
型钢
1.
Stipulate the general composition,clause order and typical example of shape steel nationl standard and trades standard direct the standarel's drawing up and revising.
规定了型钢国家标准、行业标准的一般构成、条文顺序及典型例句 ,对标准制修订人员有一定指导意义。
2.
In this paper,the major measures of quality control in every construction link with like deep mixing or inserting shape steel,are introduced.
本文阐述了施工过程中搅拌成桩、型钢插入及回收等各环节的主要质量控制措施,并总结了工程质量监督机构从行为、资料、实体等方面进行质量监管的要点。
3.
The optimizing problem for the compressed member s sections of shape steel has been studied in this paper,the conclusions provided the reference for designer.
本文研究了规定荷载下轴压型钢压杆截面型式的优选问题 ,所得结论为钢结构设计工程师的选型设计提供了理论依据 。
4) formed steel
型钢
1.
The application comparison of concrete filled steel tubes pole and formed steel pole in factory building
钢管混凝土柱和型钢柱在厂房中的应用比较
2.
Based on the experiments of the reversed low cyclic loads,the loading capacity and the deformability of the high strength concrete-formed steel composite shear walls are studied by nonlinear finite element analysis,and the effects of concrete grades,ratios of axial compression,and reinforcement ratios on loading capacity of the shear wall are further investigated.
目的在低周反复荷载试验的基础上,对高强混凝土—型钢组合剪力墙的承载力和变形能力进行有限元分析,模拟分析混凝土强度等级、轴压比和配筋率等因素对高强混凝土剪力墙承载力的影响。
5) profiled steel
型钢
1.
in Xinyang,Henan,profiled steel was used to support formwork.
河南信阳大唐华豫发电有限公司干除灰灰库1600mm超厚现浇板模板支撑体系的施工中,选择了型钢支撑方案,采取了环形柱网、核心区域设置高支撑钢管立柱以及利用搭设粗钢管三铰排架向边缘构件上卸荷等技术措施,解决了下层梁板不能承受本层施工荷载的难题。
2.
This concealed truss can be constructed with profiled steel,steel bar or profiled steel appending steel bar.
提出了内藏桁架(包括钢桁架、钢筋桁架及钢-钢筋组合桁架)混凝土组合剪力墙,该新型组合剪力墙包含2种组合:不同受力体系,桁架与剪力墙的组合;不同材料,型钢与混凝土的组合,形成了双重组合剪力墙。
6) profile steel
型钢
1.
This paper introduces automatic extraction of profile steel attribute,automatic computation of single and gross weight,automatic generation of BOM,and automatic updating of profile steel attribute.
介绍了型钢属性的自动提取,单重、总重的自动计算,以及其属性的自动更新,介绍了型钢BOM的自动生成。
补充资料：型钢
分子式：
CAS号：
性质：长度和截面周长之比相当大的直径钢材，有时也包括不属于板材、管材和线材的金属塑性加工制品。按生产方法分为热轧型钢、弯曲型钢、挤压型钢、拔制型钢和焊接型钢等。其中热轧型钢具有生产规模大，效率高，能相少和成本低等优点，是型钢生产的主要方法。型钢的断面形状支为简单、复杂和周期三类。简单断面型钢指方钢、圆钢、扁钢、户钢、六角钢等。复杂断面型钢指工字钢、槽钢、钢轨、窗框钢等周期断面型钢指螺纹钢、各种轴件、犁铧钢等。
CAS号：
性质：长度和截面周长之比相当大的直径钢材，有时也包括不属于板材、管材和线材的金属塑性加工制品。按生产方法分为热轧型钢、弯曲型钢、挤压型钢、拔制型钢和焊接型钢等。其中热轧型钢具有生产规模大，效率高，能相少和成本低等优点，是型钢生产的主要方法。型钢的断面形状支为简单、复杂和周期三类。简单断面型钢指方钢、圆钢、扁钢、户钢、六角钢等。复杂断面型钢指工字钢、槽钢、钢轨、窗框钢等周期断面型钢指螺纹钢、各种轴件、犁铧钢等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条