1) phase proportion
相比例
1.
This article analyzes and researches phase proportion and corrosion resistance of weld joint under the welding process of gas tungsten-arc welding(GTAW),and provides guidance to field welding of 00Cr22Ni5Mo3N.
采用气体保护钨极氩弧焊(GTAW),通过调整焊接工艺,分析研究该工艺下焊接接头的相比例及耐腐蚀性能,为00Cr22Ni5Mo3N双相不锈钢的现场焊接提供指导。
2.
The results indicate that keeping t12/8 constant and changing t8/5, the simulated HAZ microstructure and phase proportion almost keep same.
结果表明,固定t12/8,改变t8/5,2205双相不锈钢模拟HAZ的组织形态和相比例相差不大,用t8/5作为参数研究这种材料HAZ组织转变行为是不恰当的;固定t8/5,改变t12/8,2205双相不锈钢模拟HAZ的组织形态和相比例变化比较大,t12/8是影响这种材料HAZ组织的本质因素,用它来研究对2205双相不锈钢HAZ组织的影响更为确切。
2) phase ratio
相比例
1.
Do some research and practice the smelting, forging, rolling of 00Cr25Ni6Mo2N seamless tube bloom; summarize the key problems in the producing, such as phase ratio control, steelmaking, hot processing.
研究并实践了00Cr25Ni6Mo2N双相不锈钢的冶炼、锻造／轧制与穿管等加工过程,总结了 00Cr25Ni6Mo2N无缝钢管管坯制造过程中的相比例控制、冶炼工艺、热加工工艺等难点问题,对类似双相不锈 钢的冶炼、加工具有指导意义。
2.
This paper is based on consulting and summarizing a lot of literature,finishing a large number of experimental data and concerned with the phase ratio of Duplex stainless steel.
本文在查阅了国内外文献资料的基础上,整理了大量的试验数据,并对双相不锈钢的相比例影响因素进行了分析。
3.
The development and study status of duplex stainless steel were reviewed, and the merits and faults of performance, the influencing factors of phase ratio were analysed.
阐述了双相不锈钢的发展及研究现状,分析了双相不锈钢性能的优缺点及相比例的影响因素,对双相不锈钢的研究方向做了有价值的探讨。
3) ratio of phase
相比例
1.
In order to decide the reasonable welding procedure and make the weld joint for duplex stainless steel (SAF2205) have the intended metallographic structure and the ratio of phase as well as good corrosion resistant ability,the author researched the metallographic structure and the ratio of phase of different joint welded by different procedure.
为了确定合理的焊接工艺 ,使双相不锈钢 (SAF2 2 0 5 )的焊接接头具有预期的金相组织和相比例 ,以保证该双相钢的焊接接头具有较强的抗腐蚀能力 ,本文分析研究了该材料在不同焊接工艺下产生的金相组织和相比例 ,对实际生产中双相不锈钢的焊接具有较好地指导作用。
4) dual phase scale
两相比例
1.
The effect of the heat treatment on the dual phase scale and corros io n property in the duplex stainless steel 2205 were studied.
研究了热处理对2205双相不锈钢两相比例及耐蚀性能的影响。
5) watr-proportion
水相比例
6) in-phase proportion
同相比例
补充资料：比例内项
[编辑] 比例内项
[解释]
在比例a:b=c:d中，b、c叫做比例内项。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条