1) mechanical properties
机械性能
1.
Effect of neodymium on microstructure and mechanical properties of AZ91 magnesium alloy;
钕对AZ91镁合金组织及机械性能的影响
2.
Deposition of TiAlN film by reactive magnetron co-sputtering and related mechanical properties;
磁控共溅射制备氮化钛铝薄膜及其机械性能的研究
3.
Optimization of PMC and its mechanical properties;
聚合矿物复合材料组分优化与机械性能
2) mechanical property
机械性能
1.
Testing the mechanical property of late-model CuAlMnX shape memory alloy;
新型铜基记忆合金(CuAlMnX)机械性能测试
2.
Effect of PAN using amount on morphology and mechanical property of Ni/epoxy resin/PAN composite;
聚苯胺用量对镍粉/环氧树脂多功能复合材料分散行为和机械性能的影响研究
3.
An Intelligent Instrument for Testing Mechanical Property of Green Sand;
铸造型砂机械性能智能测试仪的研究
3) Mechanical performance
机械性能
1.
Investigation on experiment rig of measuring mechanical performances;
机械性能检测实验台的研制
2.
Study on Relationship between Sensitivity and Mechanical Performance of Optical Fiber Sensor;
光纤传感器灵敏度与探头机械性能关系的研究
3.
Cryogenic treatment attracts much attention and obtains practical application in wide fields,since it helps to improve the mechanical performance of some metal or nonmetal materials,such as strength,hardness,abradability and dimension stability.
深冷处理对于一些金属材料乃至非金属材料的强度、硬度、耐磨性和尺寸稳定性等机械性能的提高能够起到积极作用,因而广受关注并获实际应用。
4) mechanical behavior
机械性能
1.
In terms of the TL VW011 standard of Volkswagen,experimental data have been investigated by the application of such mathematical methods as normal distribution and recursive analysis in order to determine the relation among chemical component, mechanical behavior and metallographic organization.
以德国大众汽车公司ＴＬ－ＶＷ０１１标准为依据，通过对１９９６年１～５月大量数据的类比分析、正态分析和回归分析等数理方法，寻找桑车后制动鼓的化学成份与机械性能、金相组织之间的关系，并严格控制熔炼工艺，从而使其金相组织、楔压强度、硬度的报废率从１４。
2.
Under a certain circumstance of determined optaimal component and casting technics, after researching the affection on mechanical behavior by heat treatment technics, the optimal specification of heat treating the alloy would be drawn up.
高强度铝合金是多元Al－Si合金，本文在确定最佳成份及铸造工艺条件一定的情况下，研究了热处理工艺对机械性能影响的关系。
5) mechanical characteristics
机械性能
1.
Fiber filled resin can improve the mechanical characteristics of the parts manufactured by adopting stereolithography process.
对于快速成型中的光固化制作工艺 ,在光敏树脂中加入短纤维而制得的零件的机械性能可得到改善 。
2.
The detection for mechanical characteristics of high volatge circuit breaker is important.
高压断路器故障大多数是由机械原因造成的 ,故而对其进行机械性能检测十分重要。
3.
In this study,the mechanical characteristics of TRUM are tested under high temperature environment.
通过对行波型旋转超声电机在高温环境下进行了机械性能测试,得到了超声电机高温环境机械特性:超声电机的空载转速有所下降,但最大力矩随着温度的升高而增大,在70℃时,超声电机的堵转力矩达到最大,在80℃时,堵转力矩微降。
6) mechanical behaviour
机械性能
1.
In this paper, the compressed non asbestos fiber reinforced rubber sheet (CFS) gasket materials mechanical behaviour is researched.
对所研制的几种压缩非石棉 (CFS)密封板的机械性能进行了试验研究 ,比较了压缩非石棉板与传统石棉橡胶板 (CAF)和进口CFS的差异 ,分析了代石棉纤维含量对石棉板性能的影响 ,阐述了适宜的纤维及其含量有利于提高板材的综合性
2.
With respect to ring tapered differential planet stepless speed changer,the authors analyse its driving principle and structural characteristics;and discuss the characteristics of main mechanical behaviour in loading test;and point out its application range and what should be noted in design and technology.
分析环锥差动行星无级变速器的传动原理及其结构特点，并讨论其负载试验中主要机械性能的特性。
补充资料：材料机械性能计量
材料机械性能计量
mechanical property metrology of material
coi!100 iixie xingneng iiliang材料机械性能计t(~肠川i以propertymet-ml呵oflrlaterial)对表征材料机械性能的参数进行准确测量，并保证其量值统一的活动。材料机械性能又称材料力学性能。即材料抵抗外力与变形所呈现的与材料弹性或非弹性行为相关的一些性能。例如，强度、弹性、塑性、韧性、姗变、疲劳、硬度等，是机械设计的主要依据。为确定这些性能指标而进行的试验，主要有拉伸、压缩、剪切、弯曲、扭转、断裂韧性、蠕变、松弛、持久强度、冲击、疲劳及硬度试验等。试验数据是否准确可靠，依赖于以力值为主要特征的材料试脸机及应力、应变测量仪是否准确。(施昌彦)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条