1) high solid
高固体
1.
Variations of the ammonia concentration of high solid anaerobic digestion technology for organic waste.;
厨余垃圾高固体厌氧消化处理中氨氮浓度变化及其影响
2.
A pilot-scale single phase anaerobic reactor for treatment of high solid organic waste
有机垃圾单级高固体厌氧消化的中试实验
3.
Under mesophilic condition(35 ℃),a bench-scale experiment based on high solid anaerobic digestion process was conducted in a fed-batch single phase reactor to treat the OFMSW.
在中温(35~37℃)条件下,对连续式单级高固体厌氧消化反应器处理易腐有机垃圾进行了试验研究,连续试验时间达半年以上。
2) high-solids
高固体份
1.
The Automotive Finishes was composed of Cardura E 10-based acrylic resin with high-solids and excellent weather resistance as main resin, and Cardura E10-based polyester resin with high-solids as additional resin to be used to improve decorative properties, such as chubbiness, gloss, PGD,and so on, of the only acrylic amido automotive finishes.
该面漆以叔碳酸缩水甘油酯(商品名E10)改性高固体份丙烯酸树脂作为主体树脂,该树脂是具有高耐候性的丙烯酸树脂,以叔碳酸缩水甘油酯改性高固体份聚酯树脂作为添加树脂,弥补单纯丙烯酸氨基漆在丰满度、光泽、鲜映性(PGD)等外观装饰性等方面的不足,从而形成高耐候性、高装饰性的高品质、高固体份汽车面漆。
3) high solid
高固体分
1.
Hydroxyl acrylic acid resin(HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution.
采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR),详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。
2.
The title high solid acrylic resin is prepared by using solution polymerization process.
采用溶液聚合法合成高固体分丙烯酸树脂,用凝胶渗透色谱(GPC)法分析引发剂的种类和用量、反应温度及聚合工艺对丙烯酸树脂的相对分子质量及其分布的影响。
3.
A series of novel high solid silicone modified hydroxyl acrylic resins for automotive coatings were synthesized using different amount of organosilane coupling agent KH 570 as modifier.
用不同含量的硅烷偶联剂 KH570作为改性剂,合成一系列新型汽车涂料用有机硅改性高固体分羟基丙烯酸树脂,通过水接触角,粘度,铅笔硬度,附着力,耐冲击性等的测试,研究了制备工艺,硅烷偶联剂的含量对树脂性能的影响。
4) high-solid
高固体分
1.
This paper reviews the development situation of high-solid aviation coatings with low solvent content and low pollution.
简要介绍了低溶剂、低污染的高固体分航空涂料的发展概况。
2.
A new type high-solid acrylic resin has been produced.
合成了一种新型高固体分功能性丙烯酸树脂 ,研究了单体组成及用量、引发体系、反应温度与时间对树脂性能的影响 。
3.
This article is on the synthesis of high-solid acrylic resin which performs wonderfuly without environmenetal pollution.
讨论了性能优异且不污染环境的高固体分丙烯酸树脂的合成以及合成工艺、单体选择和配比对树脂性能的影响。
5) high-solids
高固体分
1.
This article describes the synthesis of high-solids hydroxyl alkyd resin using castor oil, polyol and polybasic acid and discusses in detail its synthesis method, match with TDI additive and some physicochemical properties of high-solids poyurthane varnish.
对蓖麻油、多元醇、多元酸的羟基醇酸树脂的合成及与TDI加成物配合制备高固体分聚氨酯清漆进行了论述。
6) high solid content
高固体分
1.
The synthetic technology and contitions of melamine resin with low viscosity and high solid content were discussed, the effect of mole ratio of reactants, temperature and pH on reaction process and performance of the resin wave discussed as well.
叙述了低粘度高固体分水溶性蜜胺树脂的合成工艺和条件。
2.
,gained high solid content alkyd resin.
以废旧回收的聚酯高分子材料(PET)为原料,经过高温酸降解反应后,再加入多元醇、催化剂等反应,制成高固体分醇酸树脂。
补充资料：高固体丙烯酸氨基烘干磁漆
分子式：
CAS号：
性质： 由丙烯酸酯树脂、氨基树脂、颜料、有机溶剂调制而成的一类固体成分在70％以上的烘漆。是一种集装饰性和保护性于一体的高效、节能、省资源、低污染的新型涂料。漆膜光亮丰满，色彩鲜艳，物理机械性能好，耐候性、保色性好。主要用于车辆、家用电器、高档仪器、仪表以及农用机械等要求保护、装饰性都好的金属表面涂装。施工以喷涂为主，亦可浸涂。
CAS号：
性质： 由丙烯酸酯树脂、氨基树脂、颜料、有机溶剂调制而成的一类固体成分在70％以上的烘漆。是一种集装饰性和保护性于一体的高效、节能、省资源、低污染的新型涂料。漆膜光亮丰满，色彩鲜艳，物理机械性能好，耐候性、保色性好。主要用于车辆、家用电器、高档仪器、仪表以及农用机械等要求保护、装饰性都好的金属表面涂装。施工以喷涂为主，亦可浸涂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条