说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 剪边
1)  edges cutting
剪边
2)  protectorcutter,weftcutter; threadcutter
边剪
3)  blade of scrap shear
碎边剪剪刃
4)  Scrap chopper
碎边剪
1.
Causes analysis of shearing defects of scrap chopper and its countermeasures;
碎边剪剪切缺陷的产生原因及改进
2.
To solve the cutter frequent changing, the guide box of scrap chopper was improved in cold rolling mill of Echeng Iron and Steel Co.
鄂城钢铁集团公司冷轧分厂为了解决宽带钢碎边剪刀具更换频繁问题 ,对碎边导卫盒装置进行了改进 ,换刀具周期由 10天一次改为 2~ 3个月一
5)  double-side shear
双边剪
1.
The set-up of the basic automation system of the double-side shear for plate and the synchronism control system of machinery and electric installation of nip deliver rollers were introducedBy applying the synchronism control system,the eight nip rollers hold identical speed and stable step,and the better effect of shearing was obtained
介绍了济南钢铁集团总公司中厚板厂双边剪基础自动化的系统配置和夹送辊的机械和电气同步性控制系统;采用该系统后,8台夹送辊速度一致,步长稳定,钢板的剪切效果较好。
2.
The installation technology of double-side shear for 5 m wide plate was at Baosteel introduced in detail.
详细介绍了宝钢5m宽厚板双边剪安装技术。
3.
The context of the thesis is the renovation project of Slittingdouble-side shear.
本文以双边剪机组的技术改造为背景,对国内外计算机控制相关技术的发展概况、现状、发展趋势作了简单地介绍,结合双边剪工艺及过程控制的要求,阐述了双边剪机组监控系统的总体设计及系统软硬件的配置。
6)  boundary trimming
边界裁剪
1.
New initial blank mesh generation method based on boundary trimming
基于边界裁剪的初始坯料网格剖分算法
2.
Based on the technology of path generation and boundary trimming, a new triangulation algorithm for 2D scattered data in non-convex region is presented.
本文针对传统剖分方法的不足,基于轨迹生成和边界裁剪等技术,提出了实现包含若干内孔的复杂多边形区域内散乱数据点自动三角剖分的新方法,并给出用此法进行三角剖分若干实例。
补充资料:波状(软边)挡边带式输送机
分子式:
CAS号:

性质:带式输送机的一种。在乎输送带的两侧加上有波纹形的软边,中间用隔板隔起来使其呈框形。可使其提升角度几乎不受限制,可达90°角。在提升角度大,运输场地受限制的情况下,采用此种带式输送机有显著的优越性。由于输送带上装有波形软边和隔板,物料装载厚度可以增高。输送带的清扫比较困难,维修比较复杂,不适用于有黏性的细粉物料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条