1) binder
[英]['baɪndə(r)] [美]['baɪndɚ]
粘结剂
1.
Study on Ester-Cured Montmorillonite Modified Phenolic Resin Binder;
酯固化MMT/PF树脂粘结剂的研究
2.
Effect of binder type and amount on properties of premixed steel powder;
粘结剂种类及用量对预混合钢粉粉末性能影响的研究
3.
Effect of different binders on properties of furan resin-based glass-like carbon by mold pressing;
粘结剂种类对模压成形制备呋喃树脂类玻璃炭的影响
2) adhesive
[英][əd'hi:sɪv] [美][əd'hisɪv]
粘结剂
1.
The Research of Alkali Phenol-formaldehyde Resin Adhesive for Casting;
铸造用碱性酚醛树脂粘结剂的研制
2.
Research on humates as adhesive to make Boiler Shaped Coal;
用腐植酸盐作粘结剂制锅炉型煤的研究
3.
In vitro Study on Marginal Microleakage of Four Adhesives;
4种粘结剂的微漏实验研究
3) binders
[英]['baində] [美]['baɪndɚ]
粘结剂
1.
Study on the anode binders of Ni-MH battery
氢镍动力电池用正极粘结剂的研究
2.
The polymeric binders in the NiTi were removed by methods of solvent debinding and thermal debinding.
采用金属粉末注射成形方法制备了镍钛形状记忆合金坯体,利用溶剂脱粘和热脱粘的方法脱除坯体中的粘结剂。
4) bonding agent
粘结剂
1.
The effects of the two immobilizing bonding agents on the potocatalytic activities of TiO^ film were studied.
以磷酸铝和水溶性聚丙烯酰胺为粘结剂,玻璃为载体,制备了负载型TiO2光催化剂。
2.
The effects of the mixture ratio, bonding agent type and manufacturing process on the magnetic and physical properties of the bonded rubber magnets are described in the discussion.
试验分析了成份不同的配比、不同的粘结剂类型和工艺对磁胶条磁性能和物理性能的影响,结果表明:质量分数90％磁粉、8％CPE、2％添加剂配比的YZT13B磁胶条综合性能满足使用要求;而8％CPE中采用70％135A型CPE与30％B型CPE对物理性能提高效果显著而磁性能满足要求;40％～50％压下量可以获得较佳综合性能。
3.
Filling with amalgam by normal technique in control group; wiping the cavities by 10% EDTA in EDTA group; adopting bonding agent restr.
目的 :探讨Prime&BondNT粘结剂对银汞合金充填微渗漏及密合度的影响。
5) adhesive agent
粘结剂
1.
Evaluation of the clinical curative effect and influence factors of F_(2000) Compomer with different adhesive agent for restoration of dental wedge-shaped defects
不同粘结剂等因素对F_(2000)复合体修复楔状缺损影响的临床观察
2.
Objectives: The aim of this study is to compare bond strength of two adhesive agents on five different restorative materials and dentin through shear strength evaluation.
目的:通过比较2种树脂粘结剂对不同修复材料的剪切强度来评价其粘结性能,为修复临床提供一定的依据。
3.
The suitable conditions for making floating pellets of eel in this test were: (1) the e-quipment for making floating pellets of eel was extruder; (2) the adhesive agent of pellets was starch of wheat or corn which could engender dilatancy under the given conditions; (3) the starch content of dry mixture was 26.
本次试验得到的鳗鱼浮性颗粒,其较适配制条件为:(1)用膨化机制造鳗鱼浮性颗粒饲料;(2)利用小麦或玉米淀粉在一定条件下的膨化特性作粘结剂;(3)淀粉含量为26。
6) binderless
无粘结剂
1.
Research progress of binderless cemented carbide;
无粘结剂硬质合金的研究进展
2.
Characteristic of lignite binderless hot pressure molding
褐煤无粘结剂热压成型特性
3.
Sintering,as the most important process in preparation of binderless C/C composites,was investigated,in which sintering approach and scheme was closely related with the properties of final product.
对无粘结剂C/C复合材料而言 ,烧结是整个制备工艺过程中最为关键的一个环节 ,烧结制度是否合理直接影响制品的最终质量和性能 。
补充资料：HJ-1水产饲料粘结剂
分子式：
分子量：
CAS号：
性状：白色粉末。
用途：是一种高分子型粘合剂。用作鱼虾饵料粘合剂，用量仅为饲料量的0.5%。粘合性能好。被粘接的颗粒饲料在水中保形时间大于2小时，达到鱼虾粘合剂的指标。也可用作鸡、猪、牛等配合饲料粘结剂。
制备或来源：以尿素、醛、醇为原料，经反应改性后，即得本品。
类别：粘结剂
分子量：
CAS号：
性状：白色粉末。
用途：是一种高分子型粘合剂。用作鱼虾饵料粘合剂，用量仅为饲料量的0.5%。粘合性能好。被粘接的颗粒饲料在水中保形时间大于2小时，达到鱼虾粘合剂的指标。也可用作鸡、猪、牛等配合饲料粘结剂。
制备或来源：以尿素、醛、醇为原料，经反应改性后，即得本品。
类别：粘结剂
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条