说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 管材
1)  pipe [英][paɪp]  [美][paɪp]
管材
1.
Evaluation on the uncertainty of measurement for the density of PVC-U pipes by a dipping method;
浸渍法测量PVC-U管材密度的不确定度的评定
2.
Influences of temperature and impregnating time on the dichloromethane impregnating experiments of PVC-U pipes;
温度和浸渍时间对PVC-U管材二氯甲烷浸渍实验的影响
3.
Discussion on some shortages of national standards of PVC-U water supply and drainage pipes and pipe fittings;
PVC-U给排水管材、管件国家标准中相关不足的商榷
2)  tube [英][tju:b]  [美][tub]
管材
1.
Effect of friction on deforming condition during tube expanding process;
管材扩径时摩擦对变形状态的影响
2.
The numerical analysis and experiment on the fracture in tube roll-cutting process;
管材滚压剪切的断口分析及实验研究
3)  pipe material
管材
1.
Choice of the parameters and main pipe material of 1000 MW unit;
百万千瓦发电机组参数及主要管材的选择
2.
Influence of pipe materials on microbial distribution of biofilms attached to water supply pipes;
管材对给水管附生生物膜微生物分布的影响
3.
The defects raised during piercing of round pipe die without core are analyzed, the factors affecting pipe material piercing quality are analyzed in detail, and specific steps on improving piercing quality are provided.
分析了圆管无芯模冲孔过程出现的缺陷,对影响管材冲孔质量的因素进行了详尽的分析,提出了提高管材冲孔质量的具体措施。
4)  tubing [英]['tju:bɪŋ]  [美]['tubɪŋ]
管材
1.
Characteristics of Co-Cr alloy L605 tubing for coronary stents;
冠脉支架用Co-Cr合金L605管材的特性
2.
Study on Numerical Simulation of Extrusion Forming of Mg Alloy AZ31 Tubing;
AZ31镁合金管材挤压成形数值模拟研究
3.
Development of colored PP tubing resin;
PP-R管材着色料的研制
5)  Pipes [英]['bæɡpaɪps]  [美]['bæg'paɪps]
管材
1.
Applications and Characteristics of Plastics Pipes for Hot Water Installations;
热水用塑料管材的性能及应用
2.
Progress in Processing Technologies and Applications of UHMWPE Pipes;
超高分子质量聚乙烯管材加工技术与应用进展
3.
Three HDPE6100M/HMWHDPE copolymers were extruded through the die,and circumferential and axial strengths of pipes were studied respectively.
利用自行研制的先剪切后拉伸的挤管口模,对3种不同配比的HDPE6100M/HMWHDPE共混物挤出管材的周向、轴向强度进行研究,实验中发现少量的HMWHDPE有利于HDPE管材在复合引力场挤出中实现力学性能的双向自增强,预示了少量的HMWHDPE有利于诱导HDPE6100M分子沿应力场方向取向、结晶。
6)  Tubes [英][tju:b]  [美][tjub]
管材
1.
Application of CAE technology in swelling forming process of tubes
CAE技术在管材冲压扩口成形中的应用
2.
The development and innovation in the field of hot strip,cold strip,plate,long products,tubes of China were summarized in this paper.
针对主要的钢材品种,即热轧带钢、中厚板、冷轧带钢、长材、管材等,分别从工艺、装备、产品等几方面总结了中国钢铁轧制技术的总体发展情况和取得的有创新性的进展。
补充资料:管材
      人类使用管材的历史很久,乌尔(Ur)遗址曾发现有残破的铅管;古代罗马的遗迹中也发现了输送饮水的铅管。但是,大量使用金属管还只是近二百年的事情。1815年在苏格兰发明了用钢管制作气灯和炮筒。1824年将加热的铁板两边弯曲对焊成管,1825年生产出炉焊管。1836年英国采用挤压法生产无缝钢管,以后,出现了铸钢管坯锻制成管和钢板冲杯成管的方法。1885年,德国曼尼斯曼兄弟用穿孔法生产无缝钢管,1890年开始用于工业生产。20世纪中叶,焊接技术发展后,电焊管在管材中所占比重日益增加。
  
  管材广泛用于输送各种固态、液态、气态物质和能量,并用作机械和建筑用轻型结构等方面。工业发达国家目前钢管产量占钢材产量 9~16%。用于能源开发和输送的钢管数量逐年增加,对质量的要求越来越高。
  
  金属管材按周边有无接缝分为无缝管(见无缝管生产)和焊接管(见焊接管生产)。管材规格品种繁多,圆管的规格用外径(D)和壁厚(S)表示。目前生产金属管材外径为0.1~4000mm,壁厚为0.01~200mm,除圆形以外,还有各种异形管材。(见彩图)
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条