1) Thermal property
热性能
1.
Preparation and thermal property of PET-PCT copolyester;
PET-PCT共聚酯的制备及其热性能研究
2.
Comparative study on the microstructure and thermal property of two Ti-ceramic products;
两种钛表面烤瓷粉微观结构和热性能的对比研究
3.
Comparison of structure and thermal property between bamboo fibers and regenerated bamboo fibers;
竹原纤维与竹浆纤维结构和热性能的比较
2) thermal properties
热性能
1.
Study on surface chemical and thermal properties of nano-diamond from explosive detonation;
爆轰法制备纳米金刚石表面化学与热性能研究
2.
Studies on thermal properties of bisphenol F epoxy resin modified by organic silane;
有机硅改性双酚F环氧树脂热性能研究
3.
Effect of O_2 on thermal properties of soy protein;
氧对大豆蛋白热性能的影响
3) thermal performance
热性能
1.
Experimental study on thermal performance of a new type solar air collector with colored facade in winter;
新型变色幕墙太阳能空气集热器冬季热性能实验研究
2.
Study on Thermal Performance of a New Solar Air Collector with Colored Facade (SCCF);
新型变色幕墙太阳能空气集热器的热性能研究
4) heat performance
热性能
1.
Through the test on the 40kg experimental coke oven, we investigated the influences of coke pore textures on heat performance indexes.
通过40kg试验焦炉炼焦试验,研究了焦炭气孔结构对热性能指标的影响,研究表明,焦炭气孔率、平均气孔直径、平均气孔壁厚度等,对焦炭热性能指标影响很大。
2.
Surface quality,mechanical performance and heat performance of the cured epoxy resin with different epoxy resins were studied by examination and test experiments.
通过观察试验和测定试验,研究了不同环氧树脂对其固化物的表面质量、力学性能和热性能,测定了固化物的抗压强度、抗弯强度、抗冲击强度、负荷变形温度和维卡软化温度。
3.
At the same time the microclimate temperature of electric heating garment back waist is adopted as its heat performance indices.
对积极产热式保暖服电热服,通过实验室穿着试验,从生理学和心理学2个方面挑选大量指标进行测试,对其热性能评价,并选定电热服后腰微气候温度作为电热服的热性能评价指标,采用曲线回归分析法对试验结果进行处理。
5) heat resistance
耐热性能
1.
Influence of antimony addition on heat resistance of AE41 magnesium alloy;
Sb合金化对AE41镁合金耐热性能的影响
2.
Effect of several antioxidants on heat resistance of silicone sealant;
几种抗氧剂对有机硅密封剂耐热性能的影响
3.
Effects of methacryl-POSS on the heat resistance of organic silicone resin;
甲基丙烯酰氧基倍半硅氧烷对有机硅树脂耐热性能影响
6) heat transfer performance
传热性能
1.
Effect of fouling on heat transfer performance of heat exchanger;
污垢对换热器传热性能影响
2.
Study on the heat transfer performance of spray falling film evaporator with T-shaped fin plates;
T型翅片板喷淋式降膜蒸发器传热性能研究
3.
Study on drag-reducing and heat transfer performances in heating water systems with CTAC additives;
供热水系统CTAC减阻流体减阻与传热性能研究
补充资料：高分子材料热性能
分子式：
CAS号：
性质： 是高分子材料与热或温度相关的性能总合。它包括诸多方面，例如各种力学性能的温度效应、玻璃化转变、黏流转变、熔融转变以及热稳定性、热膨胀和热传导等。是高分子材料的重要性质之一。
CAS号：
性质： 是高分子材料与热或温度相关的性能总合。它包括诸多方面，例如各种力学性能的温度效应、玻璃化转变、黏流转变、熔融转变以及热稳定性、热膨胀和热传导等。是高分子材料的重要性质之一。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条