1) vibration isolation
隔振
1.
Multi-object Optimization of Semi-active Vibration Isolation System of Precision Machine Tool;
精密机床半主动隔振系统多目标优化
2.
Effect of base impedance on vibration isolation efficiency;
基础阻抗对隔振效果的影响
3.
A simulation of vibration isolation parameters for large clutch screw press;
大型离合器式螺旋压力机隔振参数仿真分析
2) isolation
[英][,aɪsə'leɪʃn] [美]['aɪsə'leʃən]
隔振
1.
Research of a metal rubber isolation system based on complex stiffness;
基于复刚度模型的金属橡胶隔振系统的研究
2.
Theory of power flow for isolation system of CNC machine-tools with flexible foundation;
数控机床柔性基础隔振系统分析的功率流方法
3.
Influence of Flexible Chassis on Isolation Performance of Engine Mount Systems;
车身弹性对动力总成悬置隔振特性的影响
3) Vibration insulation
隔振
1.
This paper discusses the problem about insulation of locomotive against diesel engine vibration,including the characteristics of multi-cylinder locomotive diesel engine exciting force,vibration frequency coverage to be insulated,and the way to evaluate the effect of vibration insulation.
针对内燃机车上的柴油机隔振问题进行了讨论,包括多缸柴油机的激振力特点、隔振研究的频率范围和隔振效果的评价方法。
2.
According to the design requirement of an-ti-microvibration,the design meth od and application of positive and negative vibration insulation for ultraprecision machining and measuring are introduced.
较为系统地论述了振动来源,及根据超精密加工与测量的防微振设计要求,介绍了目前常采用的积极隔振与消极隔振设计方法与实现技术。
4) vibrating isolation
隔振
1.
Test and Research on Elastic Support for Vibrating Isolation and Movability of Machine Tool;
弹性支承隔振和机床可移动性的试验研究
2.
Laminated rubber bearing is utilized for vibrating isolation on accommodation module of pile foundation platform, which is excited by ocean environment.
针对海洋环境引起的桩基平台的振动,提出采用叠层橡胶支座为其生活模块进行隔振。
3.
The dynamic response for bumping on flexible pavement is analyzed briefly in the paper, Taking into account the new method-expanded polystyrene (EPS) and using finite-element method (FEM),the effect of vibrating isolation of expanded polystyrene foundation is deliberately analyzed,in order to prov.
试图从动力学角度出发 ,对柔性路面路基的桥头路基跳车进行动力分析 ,并针对当前施工中的新技术 -采取聚苯乙烯泡沫塑料工法 (EPS)的隔振性能进行了有限元分析 ,以期能为工程设计与施工提供依
5) anti-vibration
隔振
1.
Test analysis on relationship between anti-vibration performanceand chaos characteristics of vehicle suspension;
汽车悬架隔振性能与混沌特征关系的实验分析(英文)
2.
In allusion to the characteristics of anti-vibration performance of vehicle suspension,F-5103 acquisition system is demarcated in this paper,and the accuracy and reliability of demarcating result are validated by testing BJ2020S com- mercial vehicle with leaf spring rigid axle suspension and AUDI100 passenger car with MacPhersan independent suspension are tested based on F-5103 acquisition system.
经幅、频两域分析并提取特征信息,获得了被测汽车前悬架隔振性能参数,如固有频率f_0、阻尼比ξ、悬架效率η和左、右悬架效率差Δη,绘制了被测汽车前悬架振动信号的自功率谱密度图形,求得了其一阶固有频率处的带中功率ΔN,得出了被测汽车的前悬架特性并评价了其隔振性能。
3.
The primary principle of anti-vibration on vehicle is introduced.
给出了汽车隔振基本原理。
6) vibration isolating
隔振
1.
Through the test and measurement on the spot, the influences of different room fitting structures on the effect of sound insulating and vibration isolating are studied.
分析了卡拉OK扰民噪声的特点 ,通过现场实验和实测 ,研究了不同装修结构对房间隔声、隔振效果的影
补充资料：隔振
| 隔振 vibration isolation 采用适当的弹性兼阻尼装置以隔离机械振动的措施。根据激振源的不同，隔振可分为两类：①对于本身是振源的结构物，为减少其振动对周围人和物的影响，用隔振器材（如天然或人造橡胶制品、软木、毛毡制品、泡沫塑料、金属弹簧制品、不锈钢丝网制品、各种高分子化合物的粘弹性材料制品等）把振源与支承隔离开，以减小传给支承的不平衡惯性力，称为积极隔振，又称主动隔振。水泵、发动机、锻锤机械等的隔振就属此类。积极隔振系数ηz表示积极隔振效果，它等于隔振后传到支承上的力与未隔振时传到支承上的力之比。②对于振源来自支承的情况，为减少支承传给结构物的振动，把结构物安装在一个隔振台上，使它与支承隔离，这种措施称为消极隔振，又称被动隔振。精密仪器、车厢和舰艇上导弹发射架的隔振等均属此类。消极隔振系数ηb表示消极隔振效果，它等于隔振后结构物的振幅与支承运动的振幅之比。隔振系数小表示隔振效果好。两类隔振系数的计算公式相同。对于单自由度隔振系统， 
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|
|
| ©2011 dictall.com | |