1) injection mould
![点击朗读](/dictall/images/read.gif)
注塑模
1.
The injection mould design for handset bottom based on Pro/E;
![点击朗读](/dictall/images/read.gif)
基于Pro/E的电话听筒下壳注塑模设计
2.
Pro/E-based design of injection mould for diagonal tee connector;
![点击朗读](/dictall/images/read.gif)
基于Pro/E斜三通管件注塑模设计
2) injection mold
![点击朗读](/dictall/images/read.gif)
注塑模
1.
Design of ejection device of fixed mold in injection mold;
![点击朗读](/dictall/images/read.gif)
注塑模定模顶出机构设计
2.
The Design of injection mold of slender tube plastic parts with thread;
![点击朗读](/dictall/images/read.gif)
带有螺纹的细长管类塑件注塑模设计
3.
Optimum gate design of the storage-box injection mold based on CAE technique;
![点击朗读](/dictall/images/read.gif)
基于CAE技术的收纳盒注塑模浇口优化设计
3) Injection molding
![点击朗读](/dictall/images/read.gif)
注塑模
1.
Research on reconfigurable design methodology of injection molding core-pulling mechanism;
注塑模抽芯机构可重构设计方法
2.
Injection molding standard moldbase system is developed for injection molding conceptual design.
在分析注塑模标准模架结构特征的基础上,提出了应用产品族信息模型构建注塑模标准模架库的方法,并给出了注塑模标准模架产品族信息模型。
3.
The injection molding flow of six different pouring system for air-condition panel was analyzed respectively by using Molding Plastics Advisers (MPA)software.
利用模流分析软件Moldflow Plastics Advisers(MPA)对空调机面板注塑模6种构型不同的浇注系统分别进行注射成型流动分析。
4) Plastic injection mould
![点击朗读](/dictall/images/read.gif)
注塑模
1.
Friction and wear behavior of nano hard particle composite coating on plastic injection moulds;
注塑模电刷镀纳米复合涂层的耐磨性研究
2.
The design of cooling system for plastic injection mould has much to do with the production efficiency and product quality.
注塑模冷却系统的设计直接影响着注塑生产效率及塑件质量。
3.
In the paper,knowledge-based engineering (KBE) is used in the scheme design of plastic injection mould which will improve its intelligent level.
将知识工程引入注塑模方案设计中,提高了注塑模具设计的智能化程度;研究了基于事例推理的注塑模设计的关键技术,提出了面向对象的事例表达方法与基于相似度的检索方案,比较了相似度索引和神经索引的不同效果。
5) injection molding
![点击朗读](/dictall/images/read.gif)
注塑模塑
1.
The mixing principle and characteristic of cavity transfer mixer using in injection molding machine were investigated.
介绍了注射机中腔穴传递式混合器(CTM)在注塑模塑过程中的混合机理及混合特性,并评述了该类混合器的分散功能和混合效果。
6) injection mold
![点击朗读](/dictall/images/read.gif)
注塑模具
1.
Design and process of the injection mold according to UG;
![点击朗读](/dictall/images/read.gif)
基于UG的注塑模具的设计及加工
2.
Automatically determining parting line in injection mold design using the finite element method;
有限元方法在注塑模具分型线确定中的应用
3.
Research on the Green Manufacturing Method of the Injection Mold;
![点击朗读](/dictall/images/read.gif)
注塑模具的绿色制造方法研究
补充资料:注塑焊接
分子式:
CAS号:
性质:将预先成型好制品的几个部分置于模腔内,利用注射工艺射出的熔融物料使其焊接在一起而形成最终制品的方法。
CAS号:
性质:将预先成型好制品的几个部分置于模腔内,利用注射工艺射出的熔融物料使其焊接在一起而形成最终制品的方法。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条