1) continuous rolling
连轧
1.
Controlled Rolling and Cooling Technology of GCr15 Bearing Steel in Continuous Rolling;
连轧GCr15轴承钢的控轧控冷工艺
2) tandem rolling
连轧
1.
In this paper, information was given to show that the production of steel strip was produced by the technology CSP and ISP of bar strip conticasting and tandem rolling,and their technological characteris tics were compared.
介绍薄板坯连铸连轧工艺CSP法及ISP法生产带钢,并比较其工艺特点。
2.
The common tension differential equation in tandem rolling for engineering calculation was demonstrated.
论证了常用的连轧张力微分方程 ,证明此方程完全适用于工程计算 ,由它和总张力相等条件联立解出的变截面张力公式除了忽略 σ/E项所带来的误差外 ,无其他误差。
3) continuous-rolling
连轧
1.
Metal deforming analysis of H-beam in hot-continuous-rolling process
H型钢热连轧过程的金属变形分析
2.
The idea and process of micro-tension control of rod continuous-rolling line for special automobile steelare introduced as well its calculation, its operation conditions stated.
介绍了汽车专用钢棒材连轧线微张力控制的控制思想、控制过程以及微张力计算方法,说明了微张力的实现条件。
3.
In tube continuous-rolling mills, steel tube con-rolling process is one of the main deformations, and plays an important role in capacity and quality of products.
在钢管连轧机组中,毛管延伸是主要变形工序之一,对机组的生产能力和产品质量起着重要的作用。
5) casting and rolling
连铸连轧
1.
Experimental study on precipitation of Fe-3wt%Si steel strip produced by thin slab casting and rolling;
薄板坯连铸连轧Fe-3wt%Si钢带析出物的实验研究
2.
In order to improve stability and reliability of steel and iron product line,hydraulic and lubrication oil performances,pollution and wear and tear grains in slab casting and rolling product line of Guangzhou Zhujiang Steel and Iron Limited Campany were monitored.
为提高钢铁冶金生产线的稳定性与可靠性,对广州珠江钢铁有限责任公司连铸连轧生产线液压与润滑油样理化性能、污染度、磨损颗粒进行了监测。
3.
As an advanced technology in steel industry,thin slab casting and rolling(TSCR)process has made a great progress since it has come into application from 1989.
薄板坯连铸连轧是当代钢铁工业的先进技术,自1989年问世以来已取得巨大的进步。
6) continuous casting and rolling
连铸连轧
1.
Development of thin slab continuous casting and rolling in China;
我国薄板坯连铸连轧技术发展概况
2.
Operation of casting machine-the key equipment for SCRI600 continuous casting and rolling line;
SCR1600连铸连轧生产线浇铸机的操作
3.
Rolling Equipment and Technology for Thin Slab Continuous Casting and Rolling;
薄板坯连铸连轧的轧制设备配置及轧制技术
补充资料：连轧
连轧
continuous rolling
1 ionZho连轧(eontinuous rolling)在串列式轧机上，一根轧件同时在两个或两个以上的机架中以相等的金属秒体积流量进行的连续轧制，简称连轧。告影藉一 连续轧制 为使连轧过程能顺利进行，应满足力学、变形及运动学等基本条件。力学条件为各轧机间的张力q应等于常数，记作 q~C式中C可为正、负或零值，分别表示q为张力、负张力即推力或零张力即既无张力也无推力。变形条件为轧件在每一架轧机的金属秒体积流量必须相等，即 气bivi~V式中h、b、v分别为轧件厚度、宽度和速度;i为轧机序号;V为金属秒体积流量。运动学条件为第i架轧机出口处轧件速度vi卜应等于第:+l架轧机人口处轧件速度认、、，H，即 百ih二V+l，H (赵以相)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条