Ansys,Ansys,在线英语词典,英文翻译,专业英语

1) Ansys

Ansys

Damage Study of Light Hydraulic Support Turned-beam Based on ANSYS;

基于ANSYS的轻型液压支架翻转梁破坏研究

Stress Finite Element Analysis of Coal Mine Derrick Structural Based on ANSYS;

基于ANSYS的立井井架力学有限元分析

Model Analysis of Vertical Wire Electrical Discharge Machining with Rotation Wire Based on ANSYS;

基于ANSYS的立式回转电火花线切割机床线架的模态分析

2) Ansys

AMSYS

3) ANSYS

ANSYS有限元分析程序

This research measures the residual stress of high frequency electric resistant welded pipe using the central-hole method and analyses the transient state of deformation and residual stress of the weld with ANSYS nonlinear finite element program.

研究在现有条件下利用盲孔法测量了高频焊管接头焊缝的残余应力,并且采用ANSYS有限元分析程序,分析管道焊缝在焊接过程中的焊接残余应力。

4) ANSYS

ANSYS软件

Study on Application of ANSYS Software in Stability Analysis of Tailing Dam;

ANSYS软件在尾矿坝稳定性分析中的应用研究

Thinking about application of ANSYS in some geotechnical project problems;

用ANSYS软件分析不同岩土工程问题的若干思考

The Application of ANSYS to Filled Conduit Analysis;

应用ANSYS软件分析地下埋管工程

5) ANSYS

ANSYS有限元分析软件

To improve the structural design of plasma spraying gun and make the cooling system of the gun more proper,the three-dimensional fluid field and temperature field inside plasma spraying gun were calculated approximately based on ANSYS software,and then the distribution diagrams of three-dimensional fluid field and temperature field inside the gun were gotten.

为改善等离子枪体结构设计,使枪体冷却系统更加完善,用ANSYS有限元分析软件对等离子枪体内部的三维流场和温度场进行了模拟计算,得到了枪体内部的三维温度场与流场分布图。

6) ANSYS

有限元分析软件ANSYS

The involute spur gear model is built in SolidWorks-3D mechanic design software,then analyzes stress of gear tooth by the finite element software ANSYS,so obtain the contour of bending stress distribution of tooth root.

通过三维机械设计软件SolidWorks构建直齿圆柱齿轮实体模型,运用有限元分析软件ANSYS对齿根进行应力分析计算,得出齿根弯曲应力分布云图,通过与理论分析结果的比较,说明ANSYS在齿轮计算中的有效性。

参考词条

ANSYS HA复合体金粟词话

补充资料：ANSYS SOLID65环向布置钢筋的例子

ANSYS SOLID65环向布置钢筋的例子
! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1%
! 作者: 陆新征清华大学土木系
!
FINISH
/CLEAR

/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1：不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,

!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,

! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2

! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL

ESIZE,500,0,
! 注意：设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引 "ANSYS"

1) Ansys Ansys 1. Damage Study of Light Hydraulic Support Turned-beam Based on ANSYS; 基于ANSYS的轻型液压支架翻转梁破坏研究 2. Stress Finite Element Analysis of Coal Mine Derrick Structural Based on ANSYS; 基于ANSYS的立井井架力学有限元分析 3. Model Analysis of Vertical Wire Electrical Discharge Machining with Rotation Wire Based on ANSYS; 基于ANSYS的立式回转电火花线切割机床线架的模态分析 2) Ansys AMSYS 3) ANSYS ANSYS有限元分析程序 1. This research measures the residual stress of high frequency electric resistant welded pipe using the central-hole method and analyses the transient state of deformation and residual stress of the weld with ANSYS nonlinear finite element program. 研究在现有条件下利用盲孔法测量了高频焊管接头焊缝的残余应力,并且采用ANSYS有限元分析程序,分析管道焊缝在焊接过程中的焊接残余应力。 4) ANSYS ANSYS软件 1. Study on Application of ANSYS Software in Stability Analysis of Tailing Dam; ANSYS软件在尾矿坝稳定性分析中的应用研究 2. Thinking about application of ANSYS in some geotechnical project problems; 用ANSYS软件分析不同岩土工程问题的若干思考 3. The Application of ANSYS to Filled Conduit Analysis; 应用ANSYS软件分析地下埋管工程 5) ANSYS ANSYS有限元分析软件 1. To improve the structural design of plasma spraying gun and make the cooling system of the gun more proper,the three-dimensional fluid field and temperature field inside plasma spraying gun were calculated approximately based on ANSYS software,and then the distribution diagrams of three-dimensional fluid field and temperature field inside the gun were gotten. 为改善等离子枪体结构设计,使枪体冷却系统更加完善,用ANSYS有限元分析软件对等离子枪体内部的三维流场和温度场进行了模拟计算,得到了枪体内部的三维温度场与流场分布图。 6) ANSYS 有限元分析软件ANSYS 1. The involute spur gear model is built in SolidWorks-3D mechanic design software,then analyzes stress of gear tooth by the finite element software ANSYS,so obtain the contour of bending stress distribution of tooth root. 通过三维机械设计软件SolidWorks构建直齿圆柱齿轮实体模型,运用有限元分析软件ANSYS对齿根进行应力分析计算,得出齿根弯曲应力分布云图,通过与理论分析结果的比较,说明ANSYS在齿轮计算中的有效性。参考词条 ANSYS HA复合体金粟词话补充资料：ANSYS SOLID65环向布置钢筋的例子 ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! 作者: 陆新征清华大学土木系 ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0 KEYOPT,1,5,0 KEYOPT,1,6,0 KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,EX,1,,30E2 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, TBTEMP,0 TBPT,,0.0005,15 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, KWPAVE, 11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com